Desa CDCFPRA Operation And Installation Manual page 21

iNsTallaTioN
Continued
3. Install left and right brick liners using brackets
and screws from hardware kit as shown in Fig-
ure 36. Screw the bracket into top of firebox
and against brick liners. Adjust bracket before
tightening screw.
4. Remove log packaging material and discard.
Gently place log over burner (see Figure 37).
(Do not allow log to contact flame as this will
create sooting.)
5. Insert each rod through ten rings located at
top of screen (see Figure 38).
6. Insert first rod into hole in left side of firebox.
Fasten rod to rear hole near center of firebox us-
ing black Phillips head screw (see Figure 38).
7. Insert other rod into hole on right side of fire-
box and fasten rod to front hole near center of
firebox using remaining sheet metal screw.
Rear Brick
Liner
Figure 35 - Installing Rear Brick Liner
Brick Liner
Bracket and
Screw
Left Brick
Liner
Figure 36 - Installing Side Brick Liners
116658-01D
Log Set
Front Center
Hole for
Right Screen
Assembly
Screen
Rod
Rings
Screen
www.desatech.com
Figure 37 - Installing Log
Screen
Assembly
Figure 38 - Installing Screen
Back Center
Hole for Left
Screen Assembly
1