Using The Remote Control - TANDBERG 1000 MXP User Manual

3.2 Using the Remote Control

The system is controlled with a remote control. Think of the remote control as a mobile phone
with number keys and call keys. Use the arrow keys and OK to navigate the menu. The system's
most commonly used functions are also accessible directly from the remote control.
The Infra Red (IR) sensor for the remote control is located below the loudspeakers in front of the
unit.
1. Mic Off turns your microphone on and
off. (See 3.2.4 Mic off)
2. Arrow keys are used for navigation in
the menu and for moving the camera
when the menu is hidden. (See 3.2.1
Navigation)
3. Volume + and – adjusts the Codec
volume only and not the monitor's
volume. (See 3.2.5
4. The Layout key toggles between full
screen and different display layouts.
(See 3.2.3 Layout)
5. Cancel takes you back one step in the
menu system. Use Cancel to delete
characters in an input field. (See 3.2.1
Navigation)
6. Press the Call key to place a call. (See
3.5 Make a Call)
7. Camera presets define specific camera
positions. Move the camera to the
desired position and press and hold a
number key for 1 second to save the
current camera position to that number
key. To activate a preset whilst in a call,
simply press and release that number
key. (See Camera Presets)
8. Snapshot takes a snapshot of your
video. (Only while you are in a call)
(See 3.11.6 Take New
9. The Presentation key switches to a
predefined presentation source. If the
Presentation key is held down for 1
second then the Presentation video
sources menu will appear. (See 3.11.1
Presentation Key)
10. Press OK/Menu to show the menu and
to select menu items. (See 3.2.1
Navigation)
11. Use Zoom + and – to zoom the camera
in and out. (See Zoom)
General Use
Volume + and -)
Snapshot)
15