NETGEAR Wireless Router Setup Manual page 20

NETGEAR Wireless Router Setup Manual
• Some cable modem ISPs require you to use the MAC address of the computer registered on
the account. If so, in the Router MAC Address section of the Basic Settings menu, select "Use
this Computer's MAC Address." The router will then capture and use the MAC address of the
computer that you are now using. You must be using the computer that is registered with the
ISP. Click Apply to save your settings. Restart the network in the correct sequence.
Check the router status lights to verify correct router operation.
• If the Power light does not turn solid green within 2 minutes after turning the router on, reset
the router according to the instructions in
on page 6-7.
• If the Wireless light does not come on, verify that the wireless feature is turned on according to
the instructions in
3-8
"Understanding Wireless Settings" on page
August 2004
"Restoring the Default Configuration and Password"
4-3.
Connecting the Router to the Internet