NETGEAR Wireless Router Setup Manual page 51

Double-click the Network icon.
2.
The Network window opens, which displays a list of installed components:
You must have an Ethernet adapter, the TCP/IP protocol, and Client for Microsoft Networks.
Note: It is not necessary to remove any other network components shown in the
Network window in order to install the adapter, TCP/IP, or Client for Microsoft
Networks.
If you need to install a new adapter, follow these steps:
Click the Add button.
a.
Select Adapter, and then click Add.
b.
Select the manufacturer and model of your Ethernet adapter, and then click OK.
c.
If you need TCP/IP:
Click the Add button.
a.
Select Protocol, and then click Add.
b.
Preparing Your Network
Reference Manual for the 54 Mbps Wireless Router WGR614 v5
July 2004 202-10036-01
B-5