The Front Panel - NETGEAR Wireless Router Setup Manual

NETGEAR Wireless Router Setup Manual

The Front Panel

The front panel of the wireless router includes these status lights.
Figure 2-1: wireless router Front Panel
You can use the status lights to verify connections. Viewed from left to right, the table below
describes the lights on the front panel of the router.
Table 2-1. Status Light Descriptions
Label Activity
Power On Green Solid
Amber Blink
Off
Wireless On
Off
Internet On
Port Blink
LAN Ports Green
Amber
2-2
Description
Power is supplied to the router.
Power is supplied to the router and it is performing its diagnostic test.
Power is not supplied to the router.
The wireless interface is enabled.
The wireless interface is turned off.
The Internet port has detected a link with an attached device.
Data is being transmitted or received by the Internet port.
The LAN port has detected a 100 Mbps link with an attached device.
The LAN port has detected a 10 Mbps link with an attached device.
Getting to Know Your NETGEAR Wireless Router
August 2004