Connect Power Cord And Turn On The Machine; Set The Date And Time - Canon imageCLASS MF6500 Series Starter Manual

Connect Power Cord and Turn On the Machine

1
Main power switch
Connect the power cord into the rear socket and the wall
outlet and press the [I] side of the main power switch to ON.
What if...
● <CLOSE COVER LEFT COVER> is displayed:
Make sure that the left cover is closed properly.
(See "Install Toner Cartridge," on p. 3.)
● <TONER IS NOT SET INSTALL TONER> is displayed:
Make sure that the toner cartridge is installed properly.
(See "Install Toner Cartridge," on p. 3.)
7
2
Without optional cassette
1 0 0 % L T R
0 1
A T E X T
With optional cassette
1 0 0 % A U T O
0 1
A T E X T
The machine enters standby mode.

Set the Date and Time

COPY FAX SCAN
System View
Monitor Settings @./ ABC DEF
1 2 3
GHI JKL MNO
Reset Collate
4 5 6
PQRS TUV WXYZ
Paper Additional 2 on 1
Select Functions
7 8 9
OK
SYMBOLS
Frame Erase
Image Quality Density Enlarge/Reduce Two-Sided
0 #
Tone
[ ] [ ] Numeric Keys
[OK] [Additional Functions]
1 2
Press [Additional Use [
Functions]. select <6. TIMER
SETTINGS>, then press
[OK].
4 5
Use the numeric keys to Press [Stop] to return to
enter the date (month/day/ standby mode.
year) and time (in 24-hour
format), then press [OK].
Ex.
D A T E & T I M E S E T T I N G
1 2 / 3 1 / ´ 0 6 1 1 : 1 9
● Entering Information
– Numeric keys: Enter letters and
Clear ON/OFF
C numbers.
Stop
– [ ] and [ ]: Move the
Start
cursor position.
– [Clear]: Deletes the character at
Processing/
the cursor position, or the entire
Data Error Power
entry if held for more than one
second.
[Clear] [Stop]
3
] or [ ] to Confirm that
<1. DATE&TIME
SETTING> is displayed,
then press [OK].
8