Kyocera FS-6025MFP User Manual page 60

LE 05 Command Center LE 05 Command Center
User login (user authentication) User login (user authentication)
Action
Recommendations
Pre-conditions
Notes
1 Full name of account holder.
2 Login name that is to be entered in the computer or the device's operation panel.
3 Password, enter twice for security control.
4 E-mail address of the account holder is used in certain cases for notification and identification purposes.
5 A cost center can be assigned to the account holder so that for local authentication (see page 94) the 5 A cost center can be assigned to the account holder so that for local authentication (see page 94) the
criteria of this cost center (counting, limitations, allocations etc.) are automatically linked to this user.
6 Status of the account holder:
User:
No administration and system configuration is possible at the device and Command Center.
Administrator:
Full administrative access to the device and Command Center is possible.
Creating personalized accounts (local).
• Only certain persons may administer the cost centers.
• Only certain persons may apply administrative settings to the device.
• Only certain persons are allowed to have administrative access to the Command
Center. Center
• Only certain persons may use the device.
• Certain persons are subject to limitations (copy, scan, print etc.)
Administrative access to the Command Center or administrative access to system
settings of the device.
• The standard account (Admin/Admin) is set up and cannot be deleted. After
installing
the device, the password of this account should be changed for security reasons. the device the password of this account should be changed for security reasons
• The user accounts for login can also be used for the device's system settings
(only in the case of administrator status).
• A max. of 100 local accounts is possible.
• For further information, see paragraph "Authentication"