Kyocera FS-6025MFP User Manual page 41

Image adjustment procedure Image adjustment procedure
Step Adjustment
1 Print width
(Main scan)
2 Print length
3 Centering
the image
position
4 Print start
5 Leading
edge margin
6 Trailing edge
margin
7 Adjusting left
and right
margin
8 Parallelism
between
lamp- and
mirror frame
Image
B=250mm+/-1,0mm
A=350mm+/-1,4mm
20mm +/-1,0mm
from the page edge f th d
3.0mm +/- 1.0mm
5.0mm +/- 1.0mm
2.5mm +/- 1.0mm
LE 04 Maintenance LE 04 Maintenance
Setting maintenance mode
Adjustment of the poligon motor
speed.
U53 Adjust motor speed
POLY GONMOTOR
Adjustment of the main motor speed.
U53 Adjust motor speed
MAINMOTOR
Electronic adjustment of all
paper sources
U34 Set paper timing data
LSU out LEFT
MPT/CAS 1/CAS 2
CAS 3/DUP
Start time of the registration clutch is
possible for all paper sources. ibl f ll
U34 Set paper timing data
LSU out TOP
MFP(L)/CAS (L)/DUP(L)
MFP(S)/CAS (S)/DUP(S)
Deletion leading edge margin
U402 Adjust print margin LEAD
Deletion of trailing edge margin
U402 Adjust print margin
TRAIL
Deletion of lateral margins. U402
Adjust print margin
A / C
Adjustment of parallelism between
lamp- and mirror frame p
Note/ remark
Test printout
inU53. Press
system menu
key.
Test printout in
U34, system menu
key.
Test printout in
U34, system menu
key.
Test printout in
U34, system menu U34 t
key.
(L) more than
218mm
(S) less than
218mm
Test printout in
U402, system
menu key
Test printout in
U402, system
menu key
Test printout in
U402, system
menu key
Copy A3 test page
on the original g
glass. Normally no
adjustment is
required here.