Advertisement
J.
Pump
Inlet
K.
Quick
Connec
t
Nozzles
L.
Nozzle Ho
lder
M. Top
Handle
BASIC
ELEMENTS OF AN ENGINE
Refer to the Eng ine Owner's
Manual
for location and operation of engine
controls.
Choke Cont
rol:
Opens and closes carburetor choke
valve.
St arter Grip:
Pulling starter grip operates recoil starter to crank
engine.
Engine
Switch:
Enables and disables ignition
system.
ASSEMBLY INSTRUCTIONS (FIG. 2-4)
1.
Locate and remove all loose parts from the
carton.
2.
Cut four corners of the carton from top to bottom and lay the panels flat.
3.
Slide the handle assembly (G) onto the frame
(H).
NOTICE: Risk of personal injury. Avoid placing hands between handle and frame
when assembling to prevent pinching.
4.
Align holes in the top handle (M) with the mounting holes in the handle
assembly
(G).
5.
Insert saddle bolts (DD) through aligned holes and secure top handle to handle
assembly with knobs
(EE).
Tighten until
snug.
6.
Remove colored quick connect nozzles (K) from plastic bag and insert them
into correct grommet on the nozzle holder
(L). NOTE:
Nozzles are color coded
to match colored nozzles on panel.
7.
Connect wand (E) to gun
(D).
Tighten
securely.
8.
Attach high pressure hose (C) to gun
(D).
Tighten securely
.
•
·~
!
\
i
:
NOTICE: The engine is shipped without oil. Before starting engine, add the oil
provided. Damage to the engine will occur if the engine is run without oil, this
damage will not be covered under warranty.
11- ENG
Advertisement
