Download Print this page
Simpson MSV3025-S Instruction Manual

Simpson MSV3025-S Instruction Manual

Professional pressure washer
Hide thumbs Also See for MSV3025-S:

Advertisement

Quick Links

Advertisement

loading

Summary of Contents for Simpson MSV3025-S

  • Page 2: Safety Guidelines - Definitions

    SAFETY GUIDELINES - DEFINITIONS This manual contains information that is important for you to know and understand. This information relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we use the symbols below. Please read the manual and pay attention to these symbols. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
  • Page 14 Install low pressure (black) nozzle into quick connect fitting of spray wand, see how To Use Spray Wand paragraph in this section. After use of chemicals, place detergent siphon hose into container of clean water and draw clean water through chemical injection system to rinse system thoroughly.
  • Page 18: Specifications

    NOTICE: The use of any other accessory not recommended for use with this tool could be hazardous. Use only accessories rated equal to or greater than the rating of the pressure washer. SpECIFICATIONS MSV2723-S MSV3025-S Model PSI Max* 2700 PSI 3000 PSI GPM Max* 2.3 GPM...
  • Page 19 Owners Manual(s) supplied with the product, improper maintenance, the use of accessories or attachments not recommended by SIMPSON , or unauthorized repair or alterations. ®...
  • Page 20: Troubleshooting Guide

    IMPLIED WARRANTIES, INCLUDING ThOSE Of MERChANTABILITy OR • fITNESS fOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE yEAR fROM ThE DATE Of ORIGINAL PURChASE. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. TROUBLE SHOOTING GUIDE OPERATIONAL POSSIBLE CAUSE...
  • Page 21 OPERATIONAL POSSIBLE CAUSE SOLUTION ISSUE No or low Air in hose Turn off the engine, then the pressure water source. Disconnect (initial use) the water source from the pump inlet and turn the water source on to remove all air from the hose.
  • Page 22 OPERATIONAL POSSIBLE CAUSE SOLUTION ISSUE Water leaking Loose connections Tighten at pump Piston packings worn Please contact our customer service department at www.simpsoncleaning.com Worn or torn o-ring Please contact our customer service department at www.simpsoncleaning.com Pump head or tubes Please contact our customer damaged from freezing service department at www.simpsoncleaning.com...

This manual is also suitable for:

Msv2723-s