Advertisement
Quick Links
Advertisement
Related Manuals for Simpson MSVK2723-S
Summary of Contents for Simpson MSVK2723-S
-
Page 2: Safety Guidelines - Definitions
SAFETY GUIDELINES - DEFINITIONS This manual contains information that is important for you to know and understand. This information relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we use the symbols below. Please read the manual and pay attention to these symbols. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. - Page 14 After use of chemicals, place detergent siphon hose into container of clean water and draw clean water through chemical injection system to rinse system thoroughly. If chemicals remain in the pump it could be damaged. Pumps damaged due to chemicals will not be covered under warranty. NOTE: Chemicals and soaps will not siphon if the black soap nozzle is not installed on the spray wand.
-
Page 18: Specifications
Do not return this product to your retailer. Please contact our customer service department at www.simpsoncleaning.com LIMITED WARRANTY 90 DAY LIMITED WARRANTY ON pRODUCT COMpONENTS EXCLUDING pUMp SIMPSON ® warrants to the original purchaser that the wheels, gun, hose, wand, spray SIMPSON nozzle(s) and other components of the ®... - Page 19 Owners Manual(s) supplied with the product, improper maintenance, the use of accessories or attachments not recommended by SIMPSON , or unauthorized repair or alterations. ®...
-
Page 20: Troubleshooting Guide
IMPLIED WARRANTIES, INCLUDING ThOSE Of MERChANTABILITy OR • fITNESS fOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE yEAR fROM ThE DATE Of ORIGINAL PURChASE. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. TROUBLE SHOOTING GUIDE OPERATIONAL POSSIBLE CAUSE... - Page 21 OPERATIONAL POSSIBLE CAUSE SOLUTION ISSUE No or low Air in hose Turn off the engine, then the pressure water source. Disconnect (initial use) the water source from the pump inlet and turn the water source on to remove all air from the hose.
- Page 22 OPERATIONAL POSSIBLE CAUSE SOLUTION ISSUE Water leaking Loose connections Tighten at pump Piston packings worn Please contact our customer service department at www.simpsoncleaning.com Worn or torn o-ring Please contact our customer service department at www.simpsoncleaning.com Pump head or tubes Please contact our customer damaged from freezing service department at www.simpsoncleaning.com...