Error Messages - Panasonic KX-TG9312C Operating Instructions Manual

TG93xxC_OI.book Page 47 Friday, February 8, 2008 5:04 PM

Error messages

If the unit detects a problem, one of the following messages is shown on the display.
Display message
Busy
or
System is busy. Please
try again later.
Check tel line
Don't use this battery. L A wrong type of battery such as Alkaline or
Error!!
Insert battery
Invalid
No link to base.
Reconnect AC adaptor.
Phonebook full
Store VM access#
Useful Information
Cause/solution
L The called handset or base unit is in use.
L Other units are in use and the system is busy.
Try again later.
L The handset you are using is too far from the
base unit. Move closer and try again.
L The handset's registration may have been
cancelled. Re-register the handset (page 29).
L The supplied telephone line cord has not been
connected yet or not connected properly.
Check the connections (page 12).
Manganese was inserted. Use only the
rechargeable Ni-MH batteries noted on page
6, 13.
L The handset's registration has failed. Move
the handset and base unit away from all
electrical appliances and try again.
L The handset was placed on the base unit or
charger without batteries. Insert the batteries
properly (page 13).
L There is no handset registered to the base
unit matching the handset number you
entered.
L The handset is not registered to the base unit.
Register the handset (page 29).
L The handset has lost communication with the
base unit. Move closer to the base unit and try
again.
L Unplug the base unit's AC adaptor to reset the
unit. Reconnect the adaptor and try again.
L The handset's registration may have been
cancelled. Re-register the handset (page 29).
L The phonebook memory is full. Erase
unnecessary entries (page 21).
L You have not stored the voice mail access
number. Store the number (page 41).
47