Table of Contents
Advertisement
TG93xxC_OI.book Page 51 Friday, February 8, 2008 5:04 PM
Problem
I cannot dial the phone number
edited in the caller list.
Time on the unit is shifted.
The 2nd caller's information is
not displayed during an outside
call. (Visual Call Waiting
feature does not function.)
*1 KX-TG9331/KX-TG9332/KX-TG9333/KX-TG9334
Answering system (KX-TG9331/KX-TG9332/KX-TG9333/KX-TG9334)
Problem
The unit does not record new
messages.
I cannot operate the answering
system.
Useful Information
Cause/solution
L The phone number you dialed might have
been edited incorrectly (for example, the long
distance "1" or the area code is missing). Edit
the phone number with another pattern (page
34).
L Incorrect time information from incoming Call
Display changes the time. Set the time
adjustment to off (page 25).
L In order to use Call Display, call waiting, or
Visual Call Waiting, you must first contact your
service provider/telephone company and
subscribe to the desired service.
After subscribing, you may need to contact
your service provider/telephone company
again to activate this specific service, even if
you already subscribed to both Call Display
and Visual Call Waiting services.
Cause/solution
L The answering system is turned off. Turn it on
(page 35).
L The message memory is full. Erase
unnecessary messages (page 36).
L The recording time is set to "Greeting
only". Change the setting (page 39).
L If you subscribe to the voice mail service,
messages are recorded by your service
provider/telephone company not your
telephone. Change the unit's number of rings
setting or contact your service
provider/telephone company (page 39).
L Someone is using the unit. Wait for the other
user to finish.
L A caller is leaving a message. Wait for the
caller to finish.
L The handset is too far from the base unit.
Move closer.
51
Advertisement
Table of Contents
