Message Alert - Panasonic KX-TG9312C Operating Instructions Manual

TG93xxC_OI.book Page 40 Friday, February 8, 2008 5:04 PM
Answering System
Note:
L If you want to select "Greeting
only", follow the steps above and
press {0} in step 2. You may create
your own greeting-only message by
following the steps on page 36.
The unit plays the pre-recorded
greeting-only message asking callers
to call again if your own greeting-only
message is not recorded.

Message alert

You can select whether or not the
message indicator on the handset
flashes slowly when new messages are
recorded. The default setting is "On".
Important:
L The message indicator will also flash
slowly if there are new-recorded voice
mail messages (page 42).
1
{MENU} i {#}{3}{4}{0}
2
{V}/{^}: Select the desired setting.
i {Save} i {OFF}
Note:
L While message alert is on, battery
operating time is shortened (page 14).
40