Programming Via Direct Commands; Direct Commands Chart - Panasonic KX-TG2421 Quick Manual

TG2421_2422_QG(e).fm Page 5 Thursday, November 25, 2004 3:48 PM

Programming via direct commands

You can program most features using "direct commands"—special codes that take you
directly to the feature you wish to program and allow you to select the desired setting.
There is no need to scroll through the unit's menus.
1
Press {MENU}.
2
Enter the desired feature code (shown below).
3
Enter the desired setting code (shown below).
4
Press {Save}.
5
Press {OFF} to exit programming mode.

Direct commands chart

Feature
Ringer volume
Ringer tone
Voice enhancer
LCD contrast
Auto talk
Set dial mode
Change language
Message alert
Important information about subscription services
In order to use Caller ID, Call Waiting, Call Waiting Caller ID (CWID), or Voice Mail,
you must first contact your telephone company and subscribe to the desired
service.
L For more information, contact your telephone company.
If the Call Waiting Caller ID (CWID) feature does not function:
L You may need to contact your telephone company to activate this specific service, even
if you already subscribed to both Caller ID and Call Waiting with Caller ID services
(CWID).
Feature code Setting code
{1}: Low {2}: Medium
{1} {1}
{3}: High {0}: Off
{1}–{3}: Tone pattern 1–3
{1} {2}
{4}–{7}: Melody pattern 1–4
{1}: On {0}: Off
{5}
{1}–{6}: Level 1–6
{0} {1}
{1}: On {0}: Off
{0} {3}
{1}: Pulse {2}: Tone
{0} {5} {1}
{1}: English {2}: Spanish
{0} {8}
{1}: On {0}: Off
{0} {#}
– –
5