Frg ("Friendly Radio Group") Mode - Yaesu VX-6E Operating Manual

FRG ( "F
You may access other Internet Link Systems (including WIRES™ in the "FRG" mode)
that use a DTMF string for access.
Programming the FRG code
1. Load the DTMF tones which you wish to use for Internet-link access into a Internet
Memory register. For purposes of this example, we will use "#(F)1101D" as the ac-
cess code (the "#" key is denoted by the letter "F").
Press the [ F/W ] key, then press the [ 0 ( SET )] key to enter the
2
Set mode.
Rotate the DIAL knob to select Set Mode Item 32:
3
Press the [ 0 ( SET )] key to enable adjustment of this Set Mode
4
Item.
5. Rotate the DIAL knob to select the Internet Memory register
( F 0 F 0 F 0 ~ F63 F63 F63 ) into which you wish to store the access code.
F 0 F 0 F63 F63
6. Press the [ MODE ( SP S ) SQ TYP ] key momentarily. The first
digit will blink.
7. Rotate the DIAL knob to select "
the first digit of the DTMF string).
8. Press the [ MODE ( SP S ) SQ TYP ] key momentarily to accept
the first digit and move to the second digit of the DTMF string.
9. Repeat the previous steps until you have completed the access code ("#(F)1101D").
10. If you attach an alpha/numeric name "Tag" to the Internet Memory, proceed to the
next step; otherwise press and hold in the [ 0 ( SET )] key for one second to save the
setting.
11. Press the [ V/M ( DW ) MT ] key momentarily to enable program-
ming of the name tag.
12. Rotate the DIAL knob to select the first digit of the desired label.
13. Press the [ MODE ( SP S ) SQ TYP ] key to move to the next char-
acter.
14. If you make a mistake, press the [ BAND ( SCN ) BND DN ] key
to back-space the cursor, then re-enter the correct letter, number,
or symbol.
15. Repeat steps 12 through 14 to program the remaining letters, numbers, or symbols of
the desired label. A total of six characters may be used in the creation of a label.
16. When you have programmed a label which is under 6 characters, press the [ 0 ( SET )]
key to confirm the label.
17. Repeat steps 1 through 16 to store other access codes, if so desired.
18. Press the PTT switch to save the setting and exit to normal operation.
VX-6E O
PERATING
I
NTERNET
R
RIENDLY
F F F F F " (representing DTMF "#":
M
ANUAL
C
ONNECTION
" )
G
ADIO ROUP
INT.SET INT.SET INT.SET INT.SET INT.SET
F
EATURE
MODE
.
71