Table of Contents
Advertisement
I
NTERNET
FRG ( "F
1. Press the [ SET ] key to enter the Set Mode, choose the "SIGNALING" group, choose
the "J02 DTMF MEMORY" item, and then choose "FRG". Store the access code of
the Internet link to the DTMF memory register. See page 45.
2. Then set item "J06 WiRES" in the "SIGNALING" group to "FRG". See page 46.
3. Press the [ ESC ] key three times to exit from the Set Mode and activate the Internet
Connection feature in the "FRG" mode. The " " icon will appear on the display.
4. To access an FRG node, perform the following procedures:
1) Press the [ WiRES ] key to access the Set Mode.
2) Rotate the left side [ DIAL ] knob to select the WiRES memory register correspond-
ing to the WiRES™ repeater you wish to establish an internet link with.
3) Press the [ ESC ] key to exit from the Set Mode.
4) Press the [ ] key (located at the left edge of the [ SMART FUNCTION ] key while
transmitting) while pressing the PTT switch to transmit the access code.
5. To disable the Internet Connection feature, select the "OFF" selection in the Set Mode
item "J06 WiRES".
FTM-350AR/AE O
C
ONNECTION
R
RIENDLY
M
PERATING
ANUAL
G
ADIO
ROUP
F
EATURE
" ) M
ODE
21
Advertisement
Table of Contents
