Yaesu VX-6E Operating Manual page 61

Setting the Channel Counter Sweep Width
You may change the bandwidth of the Channel Counter. Available selections are ±5, ±10,
±50, and ±100 MHz (default: ±5 MHz).
Here is the procedure for setting the Channel Counter Bandwidth:
1. Press the [ F/W ] key, then press the [ 0 ( SET )] key to enter the Set mode.
2. Rotate the DIAL knob to select Set Mode Item 12:
3. Press the [ F/W ] key momentarily to enable adjustment of this
Set Mode Item.
4. Rotate the DIAL knob to select the desired bandwidth.
5. When you have made your selection, press the PTT key to save
the setting and exit to normal operation.
VX-6E O
PERATING
C
HANNEL
M
ANUAL
C O
OUNTER
CH CNT CH CNT CH CNT .
CH CNT CH CNT
PERATION
59