First Communicator Options; Communicator Disable / Enable; Dialing Format; Pulse Dialing Ratios - DSC WLS900 Installation Manual

Hide thumbs Also See for WLS900:
Table of Contents

Advertisement

Chapter 9: Communications Programming Sections
[42]

1 Communicator Disable / Enable

ON: Communicator Disabled. The system will not communicate alarms or other events.
OFF: Communicator Enabled. The system will communicate all events with programmed

2 Dialing Format

ON: Pulse Dialing. The communicator will dial using the pulse (rotary) format.
OFF: DTMF Dialing. The communicator will dial using the DTMF format for the first four

3 Pulse Dialing Ratios

ON: Pulse Dialing Ratio 67/33. This setting is for European applications.
OFF: Pulse Dialing Ratio 60/40. This setting is for North American applications.

4 Transmission Limit Setting

ON: Transmissions Limited to 24-hour Period. The Swinger Shutdown Counter
OFF: Transmissions Limited to Armed Period. The Swinger Shutdown Counter

5 Telephone Line Monitor

ON: Telephone Line Monitor Disabled. The system will not supervise the condition of the
OFF: Telephone Line Monitor Enabled. The system will supervise the condition of the

6 Telephone Line Monitor Silent / Audible

ON: Telephone Line Monitor Silent. When the system is armed, telephone line troubles
OFF: Telephone Line Monitor Audible. When the system is armed, telephone line

7 - 8 For Future Use

Indicates default setting
38

First Communicator Options

reporting codes.
dialing attempts for each programmed telephone number. For the fifth through eighth
dialing attempts, the communicator will use pulse (rotary) dialing.
programmed in Section [39] will be reset daily at 00:00 (midnight) and every time the
system is armed.
programmed in Section [39] will be reset every time the system is armed.
telephone line.
telephone line and indicate a Telephone Line Trouble if a problem is present.
will be indicated with a trouble indication from the Sounder. When the system is
disarmed, telephone line troubles will be indicated on the Keypad and the Sounder
will beep.
troubles will be indicated by an audible alarm on the Sounder. When the system is
disarmed, telephone line troubles will be indicated on the Keypad and the Sounder
will beep.

Advertisement

Table of Contents
loading

Table of Contents