Control Indicator For Belt Tensioners - Vauxhall SIGNUM Owner's Manual

Actuation of belt tensioners
is indicated by illumination of control
indicator v, see next page.
If the belt tensioners are triggered, they
must be replaced by a workshop.
Important information – see page 72.
Control indicator v for belt tensioners
The operation of the belt tensioners is
electronically monitored together with the
airbag systems and indicated on the
instrument panel by the control
indicator v. When the ignition is switched
on, the control indicator illuminates for
approx. 4 seconds. If it does not illuminate,
does not go off after 4 seconds or
illuminates whilst driving, there is a fault in
the belt tensioner system or the airbag
systems, see page 86. The belt tensioner or
the airbag systems may not activate if an
accident occurs.
Deployment of the belt tensioners is
indicated by continuous illumination of v.
Seats, interior
9
Warning
Have the cause of the fault eliminated
immediately by a workshop.
The system's integrated self-diagnostics
allows faults to be quickly remedied.
If control indicator v in the instrument
panel fails, for reasons of safety, the
text AIrbAG appears in the odometer
display. Pressing the reset button will cause
the text to disappear. It then reappears in
the odometer display 10 seconds later.
73