Universal Remote Control In Mirror Housing - Vauxhall SIGNUM Owner's Manual

38 Keys, doors, windows, sun roof
Universal remote control in mirror
housing
3
to operate up to 3 different remotely
operated systems (e.g. garage door,
domestic alarm system, domestic exterior
lighting).
The programmed universal remote control
can replace the individual remote control
units of the systems to be operated. Three
buttons on the underside of the mirror
housing can be used to operate various
systems.
Consult your Vauxhall Authorised Repairer
for details on compatible systems.
9
Warning
Ensure that no persons, animals or
objects are in the movement zone of the
system to be operated (e.g. a garage
door). Vehicle passengers should be
informed of the hazards.
Basic programming of the universal radio
control system
1. Switch on ignition.
2. When programming for the first time,
press both outer buttons under the
mirror housing, until the control indicator
alongside the buttons flashes rapidly.
3. Hold the manual remote control unit at a
distance of 0 to 30 cm from the control
button area of the mirror housing.
4. Press the button on the manual remote
control unit while pressing and holding
the desired button of the universal
remote control.
5. The control indicator in the mirror
housing will flash slowly at first. As soon
as it flashes rapidly, release both
buttons. The universal radio control
system is now programmed for the
chosen system.
6. To program other buttons with other
systems, repeat steps 3 to 5.
If a system cannot be operated after
repeated programming, and the control
indicator flashes rapidly for a short time
after the relevant button has been pressed
and then illuminates for 2 seconds, the
receiver may be equipped with a variable
code system, see next page.