Programming Unlocking Mode - Vauxhall SIGNUM Owner's Manual

Hide thumbs Also See for SIGNUM:
Table of Contents

Advertisement

Programming unlocking mode

When the vehicle is delivered from the
factory, the remote control is preset so that
a single press of the q button opens all of
the doors and the luggage compartment.
The unit can be configured so that a single
press of the q button unlocks the entire
vehicle or just the driver's door.
Change to presetting:
Hold button q on the remote control and
m
button
in the driver's door depressed
simultaneously until a double buzzer
sounds. Afterwards, only the driver's door
will be unlocked when button q is pressed
once.
The entire vehicle is then unlocked by
pressing button q on the remote control
twice.
To restore the original settings, hold
button q of the remote control and
m
button
in the driver's door depressed
simultaneously until a buzzer sounds.
The current setting is stored for the remote
control, see page 28.
Central locking switch for locking and
unlocking the doors from inside the
vehicle
m
Press button
in the driver's door: Doors
and luggage compartment are locked.
)
Press button
in the driver's door: Doors
and luggage compartment are unlocked.
When the mechanical anti-theft locking
system is active 3, see page 30, the doors
cannot be unlocked with this button.
If the vehicle is locked using the remote
m
)
control, buttons
and
in the driver's
door are inoperable.
Keys, doors, windows, sun roof
Automatic locking 3
The central locking can be set to lock
automatically at a certain speed.
To activate the function, hold button p of
m
the remote control and button
driver's door depressed simultaneously
until a double buzzer sounds.
The doors and luggage compartment are
unlocked by switching off the ignition or by
)
pressing button
in the driver's door.
Individual doors can be unlocked by
pulling on the lock button.
To deactivate the function, hold button p
of the remote control and button
driver's door depressed simultaneously
until a buzzer sounds.
The current setting is stored for the remote
control, see page 28.
31
in the
m
in the

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents