Page 1 Infotainment Manual Model Year 2014 Edition: August 2013 KTA-2748/1-VX-en 0 - 1 VAUXHALL Cascada Infotainment Manual Model Year 2014 Edition: August 2013 KTA-2748/1-VX-en...
Page 2 Contents Navi 950/650 / CD 600 ....3 Navi 900/600 / CD 400plus/ 400/300 ........73...
Page 4 Navi 950/650 / CD 600 Introduction ........4 Basic operation ......14 Radio ........... 22 CD Player ........28 External devices ......30 Navigation ........36 Speech recognition ...... 54 Phone .......... 58 Index ..........68...
Page 5: General Information
Introduction Introduction General information Optionally, the Infotainment system can be operated using the instrument The Infotainment system provides panel controls, the controls on the you with state-of-the-art in-car steering wheel or the speech infotainment. recognition function. General information ....... 4 The radio can easily be used by The well-thought-out design of the Theft-deterrent feature ....
Page 6 Introduction doubt, stop the vehicle and may issue a warning that must be operate the Infotainment system accepted. Therefore, pay while the vehicle is stationary. particular attention to one-way streets and other roads and entrances that must not be driven 9 Warning into.
Page 7 Introduction Control elements overview Navi 950 / 650...
Page 8: Table Of Contents
Introduction ; button Station buttons 1...6 TP button Short press: select station ..24 Activate or deactivate Access Home Page ....14 radio traffic service ....25 SRCE (Source) button Long press: save station ..24 10 d button m knob Press to toggle through the different audio sources Eject CD ........
Page 9 Introduction 14 Multifunction knob 20 PHONE button Turn: mark menu options Take phone call or or set alphanumeric values . . 14 activate/deactivate mute ..61 21 NAVI button Press (the outer ring): select/activate the marked Display map ......37 option;...
Page 10 Introduction CD 600...
Page 11 Introduction ; button Station buttons 1...6 TP button Long press: save station ..24 Activate or deactivate Access Home Page ....14 radio traffic service ....25 SRCE (Source) button Short press: select station ..24 10 d button m knob Press to toggle through the different audio sources Eject CD ........
Page 12 Introduction 15 BACK button Steering wheel audio controls If radio is active: turn up/ down to select next/ Menu: one level back .... 14 previous preset radio station ........22 Input: delete last character or entire entry ......14 If CD player is active: turn 16 Tone button up/down to select next/ previous CD/MP3/WMA...
Page 13 Introduction Usage or close call list ...... 61 Automatic switch-off If the Infotainment system is switched or activate/deactivate mute ... 12 on using the X knob while the ignition Control elements is switched off, it switches off again or deactivate speech The Infotainment system is operated automatically after 10 minutes.
Page 14 Introduction Mute ■ Bluetooth audio 3 30 Press the PHONE button (if Phone ■ AM radio 3 22 portal is available: press for a few ■ FM radio 3 22 seconds) to mute the audio sources. ■ DAB radio 3 27. To cancel mute again: turn the X knob or press the PHONE button Navigation...
Page 15: Basic Operation
Basic operation Basic operation Basic operation Multifunction knob Basic operation ......14 The multifunction knob is the central control element for the menus. Tone settings ....... 17 Turn the multifunction knob: Volume settings ......18 ■ To mark a menu option. System settings ......
Page 16 Basic operation BACK button Scrolling lists Press the BACK button to: ■ Exit a menu or screen. ■ Return from a submenu to the next higher menu level. ■ Delete the last character in a character sequence. Press and hold the BACK button for a few seconds to delete the entire entry.
Page 17 Basic operation Adjusting a setting Press the multifunction knob to The last character in the character activate the menu item. A checkmark sequence can be deleted using the or a point appear within the box or ring Del screen button or the BACK beside the respective menu item.
Page 18 Basic operation Treble Use this setting to enhance or attenuate the high frequencies of the audio sources. Adjust the setting as desired. EQ mode (EQ: Equaliser) Use this setting to optimise the tone for a specific style of music, e.g. Rock or Classical.
Page 19: Radio
Basic operation Press the CONFIG button and then Adjusting the Startup Volume select the Radio Settings menu item. Press the CONFIG button and then select the Radio Settings menu item. Select the Audio Cue Options menu item. Select Startup Volume to display the respective menu.
Page 20: System Settings
Basic operation Adjusting the Chime Volume To adjust the volume of the audio Language settings source possibly playing in the When operating the controls in the Press the CONFIG button and then background, select Background and vehicle, beeping sounds confirm your select the Languages menu item.
Page 21: Display Settings
To adjust the time settings, select the To update your system software, at the bottom of the screen. Set Time menu item. Adjust the contact your Vauxhall Authorised settings as desired. Repairer. The Home Page may be adjusted according to your personal...
Page 22 Basic operation Scroll to the position on the home page where you wish the icon to be located. Press the multifunction knob to confirm. The icon is moved to the new location. The icon that was located in that position before is now displayed in the position of the moved icon.
Page 23: Activating Radio
Radio Radio Usage Manual station tuning In the FM and DAB waveband, press Activating radio the multifunction knob to open the respective menu and then select Press the ; button and then select Usage .......... 22 Manual tuning. The frequency the AM, FM or DAB icon.
Page 24: Autostore Lists
Radio Note Some stations also change the PTY Updating the station lists If no station list has been created code depending on the content which If the stations stored in the waveband- beforehand, the Infotainment is currently transmitted. specific station list can no longer be system performs an automatic received, the AM and the DAB station The Infotainment system stores these...
Page 25: Favourite Lists
Radio Storing stations manually Stations can also be stored manually in the autostore lists. Set the station to be stored. Press the AS button to open the autostore list or to switch to another autostore list. To store the station in a list position: press the corresponding station button 1...6 until a confirmation message is displayed.
Page 26 Radio Retrieving a station Advantages of RDS If required, briefly press the FAV ■ On the display the programme button to open a favourite list or to name of the set station appears switch to another favourite list. Press instead of its frequency. one of the station buttons 1...6 to ■...
Page 27 Radio If Regional is deactivated, alternative Radio traffic service Traffic Volume frequencies of the stations are To adjust the volume of traffic (TP = Traffic Programme) selected without regard to regional announcements, select the Traffic Radio traffic service stations are RDS programmes.
Page 28: Digital Audio Broadcasting
Radio If you wish the time and date settings ■ As long as a given DAB receiver background and continually to be updated automatically, activate can pick up the signal sent out by a searches for the best receivable FM the RDS Auto Time Adjust menu item.
Page 29: Cd Player
CD Player CD Player General information MP3 CDs The following file formats can be used: ISO9660 Level 1, Level 2, Important information about (Romeo, Joliet). audio CDs and MP3/WMA CDs General information ..... 28 MP3 and WMA files written in any The Infotainment system's CD player format other than listed above may Usage ..........
Page 30 CD Player Usage Depending on the data stored on the Function buttons audio CD or MP3 CD, more or less Skipping to previous or next track detailed information on the CD and Starting CD playback the current music track are shown on Press the t or v buttons once or Push the CD with the labelled side the display.
Page 31: External Devices
External devices External devices General information To disconnect the AUX device, select another function and then remove the Sockets for the connection of external AUX device. devices are located in the centre console. USB port General information ..... 30 An MP3 player, USB device, iPod or Note Playing audio .......
Page 32 External devices Note The Infotainment system can play Picture files If a non-readable USB device or music files contained in Bluetooth The displayable picture file formats iPod is connected, a corresponding devices, e.g. iPod or Smartphone. are .jpg, .jpeg, .bmp, .png and .gif. error message will appear and the The files must have a maximum size Connecting a device...
Page 33: Playing Audio
External devices Playing audio Skipping to previous or next track Press the t or v buttons once or Starting playback several times to skip to the previous or next track. If not connected, connect the device 3 30. Fast forwarding or rewinding Press the ;...
Page 34: Function Buttons
External devices Browse through the structure until Press the ; button and then select the USB device, e.g. a name or you find the desired track. number. The respective information is the Pictures icon to open the Picture displayed above the picture. Viewer USB menu.
Page 35 External devices Picture menu Before an application can be First, a list of all phones paired to the operated using the controls and system is displayed. Select the phone To display the picture menu, select menus of the Infotainment system, with which you want to establish an the Menu screen button at the bottom the respective application has to be...
Page 36 External devices Select the Apps screen button at the Enter the search name. A list of all To display a list of all apps installed bottom of the screen to display the apps found for the respective search on the Infotainment system, select apps menu.
Page 37: Navigation
Navigation Navigation General information followed. If a navigation instruction contradicts traffic regulations, the The navigation application will reliably traffic regulations always apply. guide you to your destination without the need to read maps. General information ..... 36 Functioning of the navigation The current traffic situation is taken Usage ..........
Page 38 Navigation Route guidance is provided by voice If route guidance is not active, the Route guidance active commands and a direction arrow, as following information is displayed: well as with the aid of a multi-colour ■ In the top line: information on the map display.
Page 39 Navigation ■ Current position: indicated by a red Map manipulation Changing the map mode triangle within a grey circle. The map may be displayed in three Moving the visible map section (route guidance not active), ■ Route: indicated by a blue line. The visible map section on the map respectively five (route guidance ■...
Page 40 Navigation Map modes Map display Changing screen information Press the multifunction knob to Press the multifunction knob to The route information displayed on display the Navigation Menu. Select display the Navigation Menu. Select the screen during active route the Map Modes menu item to display the Map Settings menu item and then guidance may be customised.
Page 41 Navigation Position information Saving a position Use Last Known Position To set the last position provided by a The current position or a destination Current position GPS signal as starting point, select position may be saved in the address the Use Last Known Position menu Press the multifunction knob to book.
Page 42: Destination Input
Navigation Select the Cancel Route Simulation menu item. Additional route simulation menu When route guidance is active in the simulation mode, an additional menu is displayed in the Navigation Menu. Press the multifunction knob to display the Navigation Menu. Scroll through the list and select the Route Simulation menu item to display the respective submenu.
Page 43 Navigation Note To enter special characters not The house number entered must available on the letter keyboard, have as many digits as the biggest select the ÄÖ screen button at the house number in the respective right side of the letter keyboard. The street, e.g.
Page 44: Points Of Interest
Navigation To manually display a list of matching Press the DEST button to display the Select the Category entry field to entries for the current input, select the Destination Entry menu and then display a POI category list. Select the respective List screen button at the select the Points of Interest icon to desired category and then a...
Page 45: Previous Destinations
Navigation Telephone number search mask Previous Destinations Select the Country entry field to The last destinations selected or display a list of all available countries. entered for route guidance are stored Select the desired country. within the system. Select the Sort Method entry field to Press the DEST button to display the display the respective submenu.
Page 46 Navigation Depending on the information Select the Done screen button at the Editing addresses in the address available, the different entry fields are bottom of the entry mask. The book already filled. address is stored. Press the DEST button to display the Destination Entry menu and then To enter or modify the name of the Selecting addresses from the...
Page 47 Navigation displayed. The phone book jumps to Destination selection from the A confirmation menu is displayed. the position of the letter range Select the Start Guidance menu item selected. to start route guidance. Destinations (addresses or POIs) may also be set via the map. Note If there is more than one POI located Press the NAVI button to display the...
Page 48 Navigation Selecting the home address Select the Add screen button at the position where you wish to add a Press the DEST button to display the waypoint. The Destination Entry Destination Entry menu and then menu is displayed. select the My Home icon. Enter or select the desired Route guidance to the home address destination.
Page 49 Navigation Moving waypoints The waypoint route is saved. To change the order of the waypoints Creating new favourite routes in the route, select the Sort Press the DEST button to display the Waypoints screen button. Destination Entry menu and then Select the Move screen button next to select the Favourite Routes icon to the waypoint you wish to move.
Page 50 Navigation Selecting a favourite route To start route guidance, select the Start Guidance menu item. Press the DEST button to display the Destination Entry menu and then Deleting saved destinations select the Favourite Routes icon to To delete destinations stored in the display a list of the favourite routes system, press the CONFIG button, saved.
Page 51 Navigation Voice prompts Select Volume Test to get an audio example of the settings. Navigation voice prompts announce which direction to follow, when Guidance alerts approaching an intersection at which Guidance alerts show in a close-up you need to turn. view of the respective map section Press the CONFIG button and then which direction to follow when...
Page 52: Traffic Incidents
Navigation Traffic incidents Choose between Automatic TMC stations Recalculation and Recalculation after The TMC stations broadcasting traffic The TMC traffic information system Confirmation of a corresponding information, may be set automatically receives all current traffic information message. or manually. from TMC radio stations. This information is included in the Select the Traffic Stations menu item Traffic incidents on the map...
Page 53 Navigation To display a list of the traffic events To display a list of all tracking concerning the current route, select sessions, select the Saved screen the Traffic Events on Route menu button. Select the desired tracking item. session to display the Bread Crumb Details menu.
Page 54 Navigation Turn List Avoid List Exit list The Turn List displays all streets and When streets have been excluded To display a list of the next exits and turning manoeuvres on the calculated from the original route, they are motorway stations while driving on a route starting from the current displayed in the Avoid List.
Page 55: Speech Recognition
Speech recognition Speech recognition General information In the first command, you indicate the type of action to be performed, e.g. The speech recognition of the "Navigation destination entry". The Infotainment system enables you to system replies with prompts that lead operate various functions of the you through a dialogue for entering General information .....
Page 56: Phone
Speech recognition In such a case you need to select For changing the display language, The audio system mutes, the w another language for the display if see "Language" in chapter "System symbol on the display is highlighted, you want to control the Infotainment settings"...
Page 57 Speech recognition Interrupting a voice prompt Operation via speech song name, or "Tune to" followed by the radio frequency and the commands As an experienced user, you can waveband. interrupt a voice prompt by briefly The speech recognition can pressing the w button on the steering Navigation destinations, however, understand commands that are either wheel.
Page 58 Speech recognition Selecting list items The "Help" command When a list is displayed, a voice After saying "Help", the help prompt prompt asks to confirm or select an for the current dialogue step is read item from that list. A list item may be aloud.
Page 59 Phone Phone General information Important information for operation and traffic safety The Phone portal provides you with the possibility of having mobile phone 9 Warning conversations via a vehicle General information ..... 58 microphone and the vehicle Mobile phones have effects on Bluetooth connection ....
Page 60: Bluetooth Connection
Phone Via the Bluetooth menu, pairing (PIN Bluetooth menu phones is prohibited, if code exchange between Bluetooth To open the Bluetooth menu, you interference is caused by the device and Infotainment system) and may optionally: mobile phone or if dangerous connecting of the Bluetooth devices situations can occur.
Page 61: Emergency Call
Phone A six-digit PIN code for the pairing Device list Deleting a device process is displayed on the Select the device you wish to delete. The device list contains all Bluetooth Infotainment system. A submenu is displayed. devices paired to the Infotainment system.
Page 62 Phone Answer when the service personnel Not every telephone supports all 9 Warning questions you about the emergency. functions of the phone application. Therefore, deviations from the range Bear in mind that you can make 9 Warning of functions described are possible. and receive calls with the mobile phone, if it is in a service area with Phone main menu...
Page 63 Phone Phone book Press the PHONE button and then select the Phone Book menu item. The Phone Book Search menu is displayed. Enter the desired number. Select the desired entry in the telephone book to display the Select the Del screen button or press numbers saved under this entry.
Page 64: Incoming Calls
Phone Call lists Press the PHONE button and then select the Call Lists menu item. The Call Lists menu is displayed. Ending a phone call To take the call, select the Answer To end the call, select the Hang up screen button.
Page 65: Text Messages
Phone Text messages To transfer the call back to the Infotainment system, select the As soon as a connection via Transfer call menu item in the Private Bluetooth has been set up between Call menu. your mobile phone and the Infotainment system, you can operate Second phone call the messages inbox of your mobile...
Page 66 Phone The Messages icon in the Home Reply menu of the Infotainment system is To directly answer the message, then selectable. select the Reply screen button. A list of predefined messages is displayed. Incoming text message Select the desired message and When a new text message is confirm your input.
Page 67 Phone Mobile phones and CB Seek advice on predetermined Caution installation points for the external radio equipment antenna or equipment holder and Mobile telephones and radio ways of using devices with a Installation instructions and equipment may lead to transmission power exceeding operating guidelines malfunctions in the vehicle 10 watts.
Page 68 Phone...
Page 69: Index
Index Activating AUX......32 Category list........22 Activating Bluetooth music... 32 CD player........28 Activating CD player..... 29 Chime volume....... 18 Activating radio......22 Control elements Activating the Infotainment system 12 Infotainment system....6 Activating the navigation system. . 37 Steering wheel......
Page 70 Audio files........30 Menu operation......14 Turn list........49 Picture files........ 30 Messages........14 Voice prompts......49 Midrange........17 Waypoint trip......41 Mobile phones and CB radio Navigation system......36 General information 28, 30, 36, 54, 58 equipment ........ 66 Navigation volume......
Page 71 Phone call Route guidance......49 Treble........... 17 Initiating........61 Route simulation......37 Turn list......... 49 Taking........61 Picture files........30 Software update......19 Usage....12, 22, 29, 37, 55 Pictures......... 33 Speech recognition....... 54 AUX........... 32 Playing audio........ 32 Station list........22 Bluetooth music......
Page 72 Waveband selection..... 22 Waypoint trip......... 41...
Page 74 Navi 900/600 / CD 400plus/400/300 Introduction ........74 Radio ........... 98 CD Player ........114 AUX input ........120 USB port ........122 Digital picture frame ....126 Navigation ........129 Speech recognition ....174 Phone ........188 Index .......... 206...
Page 75 Introduction Introduction General information to your destination, and, if desired, will automatically avoid traffic jams or The Infotainment system provides other traffic problems. you with state-of-the-art in-car Optionally, the Infotainment system infotainment. General information ..... 74 can be operated using controls on the For the AM, FM and DAB (if available) steering wheel, or via the speech Theft-deterrent feature ....
Page 76: Theft-Deterrent Feature
Introduction Theft-deterrent feature Important information on 9 Warning operation and traffic safety The Infotainment system is equipped In some areas one-way streets with an electronic security system for 9 Warning and other roads and entrances the purpose of theft deterrent. (e.g.
Page 77: Control Elements Overview
Introduction Control elements overview Navi 600 / Navi 900...
Page 78: Cd/Mp3/Wma: Skip Track Backwards
Introduction RADIO (BAND) ..... 98 Search forwards ....98 13 INFO ........76 Activate radio or change Radio: search forwards ..98 Radio: information on the waveband ......98 currently played station ..98 CD/MP3/WMA: skip track CD/AUX ......120 forwards ......
Page 79 Introduction 17 BACK ........86 Menu: one level back .... 86 Input: delete last character or entire entry ......86 18 RPT ........167 Repeat last navigation message ......167 19 DEST ........130 Navigation destination entry ........130 20 PHONE ....... 188 Open telephone menu ..
Page 80 Introduction CD 400 / CD 400plus...
Page 81: Open Settings Menu
Introduction RADIO (BAND) ..... 98 AS (1/2) ......... 99 12 INFO ........76 Activate radio or change Automatic memory levels Radio: information on the waveband ......98 (preset radio stations) ... 99 currently played station ..98 CD ........120 Short press: select CD/MP3/WMA: autostore list ......
Page 82 Introduction 18 AUX ........120 Change audio source ..120...
Page 83 Introduction CD 300...
Page 84 Introduction RADIO (BAND) ..... 98 AS (1/2) ......... 99 13 INFO ........76 Activate radio or change Automatic memory levels Radio: information on the waveband ......98 (preset radio stations) ... 99 currently played station ..98 CD ........120 Short press: select CD/MP3/WMA: autostore list ......
Page 85 Introduction 19 PHONE ....... 188 Steering wheel audio controls If radio active: turn upwards/downwards to Open telephone main menu 198 select next/previous preset radio station ....98 Activate mute ......85 20 AUX ........120 If CD player active: turn upwards/downwards to Change audio source ..
Page 86: Usage
Introduction Usage Setting the volume To cancel mute again: turn the X knob or press the PHONE button Turn the X knob. The current setting again (if Phone portal available: press Control elements is shown on the display. for a few seconds). The Infotainment system is operated When the Infotainment system is via function buttons, multifunctional...
Page 87: Basic Operation
Introduction Audio players Press the multifunction knob to open BACK button a submenu with options for the input Press the CD / AUX / CD/AUX button Press the BACK button briefly to: or selection of numbers. to open the CD, USB, iPod or AUX ■...
Page 88 Introduction Turn the multifunction knob to move Setting a value Switching a function on or off the cursor (= coloured background) to the desired option. Press the multifunction knob to select the marked option. Submenus An arrow on the right-hand edge of the menu indicates that after selection of the option a submenu with further options will be opened.
Page 89 Introduction Entering a character sequence CD 400 / CD 400plus Activating a setting Selecting an option To enter character sequences, e.g. Turn the multifunction knob to mark telephone numbers or road names: the desired setting. Turn the multifunction knob to move the cursor (= coloured background) to Turn the multifunction knob to select Press the multifunction knob to...
Page 90 Introduction Setting a value Switching a function on or off Entering a character sequence Turn the multifunction knob to change Turn the multifunction knob to mark For the input of character sequences, the current value of the setting. the function to be switched on or off. e.g.
Page 91 Introduction CD 300 The arrow pointing to the right 3 Setting a value indicates: the first submenu level is Menu elements and symbols active (two arrows = second submenu level active). The down arrow 4 indicates: further options are available in the active submenu.
Page 92: Tone Settings
Introduction Tone settings Switching a function on or off Entering a character sequence Navi 600 / Navi 900 In the tone settings menu the tone characteristic can be set differently for each radio waveband and each audio player source. Press the multifunction knob to open Press the multifunction knob to open the corresponding settings menu.
Page 93 Introduction Setting bass, middle and treble Setting the volume distribution Setting the volume distribution between front - rear between right - left Select Bass, Middle or Treble. Select Fader. Select Balance. Set the desired value for the option selected. Set the desired value. Set the desired value.
Page 94 Introduction Optimising the tone for the style of Select Bass:, Midrange: or Treble:. music Set the desired value for the selected option. Setting the volume distribution between front - rear Press the TONE button to open the tone menu. Select EQ (Equalizer). Setting bass, middle and treble The displayed options offer optimised bass, middle and treble presettings...
Page 95: Volume Settings
Introduction Volume settings Setting the volume distribution Optimizing the tone for the style of between right - left music Navi 600 / Navi 900 Maximum startup volume Select Balance:. Select EQ: (Equalizer). Set the desired value. The displayed options offer optimized bass, middle and treble presettings Setting an individual setting to “0”...
Page 96 Introduction Speed dependent volume Volume of the traffic announcements CD 300 / CD 400 / CD 400plus (TA) Maximum startup volume The volume of the traffic announcements can be increased or reduced proportionately to the normal audio volume. Press the CONFIG button to open the system settings menu.
Page 97: Personalisation
Introduction Personalisation Speed compensated volume Volume of the traffic announcements (TA) (only CD 400plus) The volume of the traffic Various Infotainment system settings announcements can be increased or can be separately memorised for reduced proportionately to the normal each vehicle key (driver) of the car. audio volume.
Page 98 Introduction ■ last position in Audio/MP3 CD including track number and folder ■ state of shuffle songs setting (CD player) ■ state of TP (Traffic Programme) setting ■ cursor position for each menu on the display Activating/deactivating personalization Press the CONFIG button to open the system settings menu.
Page 99: Station Search
Radio Radio Usage Station search Control buttons Automatic station search The most important buttons for Briefly press the button s or u Usage .......... 98 control of the radio are as follows: to play the next station in the station Station search ......
Page 100 Radio Note DAB waveband Note Manual station search: If the radio The currently received station is (not available for CD 300) does not find a station, it switches highlighted. Press the multifunction knob to open automatically to a more sensitive the DAB menu and select DAB CD 400 / CD 400plus: search level.
Page 101 Radio Automatic station storing Retrieving a station 6 stations can be stored in each favourite list. The number of available Keep the AS button pressed until an Briefly press the AS button to open an favourite lists can be set (see below). autostore message is displayed.
Page 102 Radio Defining the number of available CD 300 / CD 400 / CD 400plus To store the station in a list position: favourite lists press the corresponding station button 1...6 until a confirmation message is displayed. Retrieving a station Briefly press the FAV button to open a favourite list or to switch to another favourite list.
Page 103: Waveband Menus
Radio Press the CONFIG button. Navi 600 / Navi 900 Select Radio settings and then Radio favourites. Select the desired number of available favourite lists. Waveband menus Alternative facilities for station selection are available via waveband specific menus. With the radio main menu active Select the required station.
Page 104 Radio Turn the multifunction knob. Updating station lists once in the station list at a sudden change in reception area. In such If the stations stored in a waveband- All receivable DAB stations 3 111 in circumstances the updating of the specific station list can no longer be the current reception area are station lists can be accelerated using...
Page 105 Radio The currently received DAB service (programme) is interrupted when any announcements of previously activated categories are pending. Activating announcement categories Select DAB announcements in the DAB menu. A list of programme types available at Select the required station. the moment is displayed. The category list is also updated Select desired programme type.
Page 106 Radio CD 300 / CD 400 / CD 400plus All receivable DAB stations 3 111 in the current reception area are displayed. Note If no station list has been created beforehand, the Infotainment system performs an automatic station search. Select the required station. Note Favourites list The currently received station is...
Page 107 Radio If the stations stored in a waveband- The Infotainment system stores these specific station list can no longer be stations, sorted by programme type, received: in the corresponding category list. Select the corresponding command To search for a programme type to update a station list.
Page 108 Radio Radio data system (RDS) The currently received DAB service Navi 600 / Navi 900 (programme) is interrupted when any RDS is a service of FM stations that announcements of previously considerably facilitates the finding of activated categories are pending. the desired station and its fault-free Activating announcement categories reception.
Page 109 Radio If regionalization is switched on, only TA volume alternative frequencies (AF) with the The volume of the traffic same regional programmes are announcements (TA) can be preset selected. 3 94. If regionalization is switched off, Radio traffic service alternative frequencies of the stations (TP = Traffic Programme) are selected without regard to Radio traffic service stations are RDS...
Page 110 Radio ■ If a radio traffic service station has EON (Enhanced Other Networks) Select Radio settings and then RDS been found, [TP] is indicated on the With EON you can listen to radio options. display in black. If no radio traffic traffic announcements even if the CD 300: Select Audio settings and service stations are found, TP is...
Page 111 Radio Note RDS-scrolling text Switching the radio traffic service on If RDS is switched off, it will be Some RDS stations hide the and off automatically switched on again programme name in the display line To switch the traffic announcement when a radio station is changed (by in order to display additional standby facility of the Infotainment...
Page 112 Radio Listening to traffic announcements Digital audio broadcasting (DAB) is CD 400plus: only an innovative and universal Switch on the radio traffic service and broadcast system. completely turn down the volume of DAB stations are indicated by the the Infotainment system. programme name instead of the broadcasting frequency.
Page 113: Configuring Dab
Radio ■ As long as a given DAB receiver improved, whereas AM or FM Configuring DAB can pick up the signal sent out by a reception is considerably impaired Navi 600 / Navi 900 broadcasting station (even if the in such cases. signal is very weak), sound ■...
Page 114 Radio can be raised to a point where the The following options are available in can be raised to a point where the quiet sounds are audible, without the configuration menu: quiet sounds are audible, without the loud sounds being too loud. the loud sounds being too loud.
Page 115 CD Player CD Player General information ■ Self-recorded CD-Rs and CD-RWs are more vulnerable to mishandling than prerecorded CDs. Correct Navi 600 / Navi 900 handling, especially in the case of The Infotainment system’s CD player self-recorded CD-Rs and CD-RWs, General information ....
Page 116 CD Player Maximum folder structure depth: 11 Important information about audio names and folder names may not levels. CDs and MP3/WMA CDs be displayed correctly. Maximum number of MP3/WMA Note Caution files that can be saved: 1000. ISO 13346 is not supported. It may be required to manually select ISO WMA files with Digital Rights Under no circumstances place...
Page 117 CD Player ■ Avoid leaving fingerprints when you Applicable playlist Starting CD replay change CDs. extensions: .m3u, .pls, .asx, .wpl. Push CD with the labelled side upward into the CD slot until it is ■ Put CDs back in their sleeves ■...
Page 118 CD Player Skipping to the next track or previous Selecting tracks using the audio CD During MP3 replay track or MP3 menu Briefly press s or u button once During audio CD replay or several times. Track search forward or backward Briefly press s or u button and then press s or u button again and keep pressed until the desired...
Page 119 CD Player CD 300 / CD 400 / CD 400plus Inserting a CD Insert a CD with the printed side facing up into the CD slot until it is drawn in. Changing the standard page view (only CD 300) During audio CD or MP3 replay: press the multifunction knob and then select Default CD page view or Default MP3 page view.
Page 120 CD Player Selecting tracks using the audio CD During MP3 replay To open a menu with additional or MP3 menu options for track search and selection (only CD 400plus): select Search. During audio CD replay What options are available depends on the data saved on the MP3 CD.
Page 121: Aux Input
AUX input AUX input General information In the centre console there is an AUX socket for the connection of external Navi 600 / Navi 900: audio sources. It is possible, for example, to connect General information ....120 a portable CD player with a 3.5 mm jack plug to the AUX input.
Page 122 AUX input CD 300 / CD 400 / CD 400plus: An audio source that is connected to the AUX input can be operated only via the control elements of the audio source.
Page 123: Usb Port
USB port USB port General information Note Not all MP3 player, USB drive and iPod models are supported by the Navi 600 / Navi 900 Infotainment system. General information ....122 Important information Playing saved audio files ... 123 MP3 player and USB drives ■...
Page 124: Playing Saved Audio Files
USB port Playing saved audio files WMA files can only be played back In the centre console there is a USB safely if they were created with socket for the connection of external Windows Media Player version 8 or audio data sources. Navi 600 / Navi 900 later.
Page 125 USB port iPod iPod functions CD 400plus Press the CD/AUX button once or Depending on the data saved, there Press the AUX button once or several several times to activate the audio are various options for the selection times to activate the USB mode. iPod mode.
Page 126 USB port Selecting tracks using the USB menu To repeat the currently played track: set Repeat to On. Press the multifunction knob to open the USB related menu. To play all tracks in succession: select Play all. To display a menu with various additional options for track search and selection: select Search.
Page 127: Digital Picture Frame
Digital picture frame Digital picture frame General information ■ Only pictures in JPEG standard format (file extensions, e.g., .jpg Using the digital picture frame or .jpeg) are supported. function (only Navi 600 / Navi 900) Example: "F:\myPicture.jpg", you can view your favourite pictures General information ....
Page 128: Displaying Pictures
Digital picture frame Press the CONFIG button, select Display settings, and then select Picture frame. The menu shown below is displayed. The menu shows a list with the file Select max. 10 pictures that you want names of all pictures (note the to be downloaded (added) to the restrictions described in "Important Infotainment system's memory or...
Page 129 Digital picture frame Press the CONFIG button, select As long as a picture stays selected in Display settings, select Picture the Picture selection menu, it can be frame, and then select Picture displayed at any time using the selection. The menu shown below is INFO button.
Page 130 Navigation Navigation General information followed. If a navigation instruction contradicts traffic regulations, the The navigation system will reliably traffic regulations always apply. guide you to your destination without the need to read maps, even if you General information ....129 Functioning of the navigation have no local knowledge whatsoever.
Page 131 Navigation The route guidance is provided by Dynamic route guidance only works if display (if route guidance active) and voice output and an arrow, as well as traffic information is received via the split screen display, see "Information with the aid of a multi-colour map TMC traffic information system.
Page 132 Navigation Adjusting the volume of route If route guidance is not active, the Route guidance active guidance messages while they are following information is displayed: If route guidance is active, the announced: turn the X knob. following information is displayed ■...
Page 133 Navigation ■ A small arrow representing the Distances to the next service areas, overnext driving recommendation. parking areas, intersections and/or exits on the highway. ■ Distance to the next intersection. ■ When reaching a highway ■ Streets leading off the current intersection information regarding street to follow.
Page 134 Navigation On the right side of the display the Note following information is shown: To change to full map display: press NAV button twice. ■ A compass symbol that indicates the north direction. Setting up the navigation ■ If no GPS signal (see chapter system "General information"...
Page 135 Navigation Sort criteria Import individual POIs To remove all imported POIs of a Select whether traffic messages are certain category: import an empty Only applicable if a USB drive with to be displayed in an order based on POI data file of the regarding points of interest (POI) data stored on distance or street name.
Page 136 Navigation of interest stored in the myPOIs ■ Individual POIs: favourite Advantages of POI export and import memory, see "myPOIs announcer" destination addresses that were The export and import of points of below. stored in the myPOIs memory. interest data offer you, e.g., the following advantages: You can export these individual Exporting and importing POI...
Page 137 Navigation Exporting and importing individual For each exported POI category, e.g. POIs and address book entries Restaurant or Private, you will find a correspondingly named file in that Brief description: folder. 1. Connect a USB drive to the USB port of your car's Infotainment Examples: system.
Page 138 Navigation To start the import: press the 3. Store the text files with your POI Each text file name need to consist of CONFIG button, select Navigation data on a USB drive. the category name, a single settings, select Import individual underscore, the category's number 4.
Page 139 Navigation The POI data of each destination address need to be entered in a single separate line, see image above. Storing the text files on a USB drive The text files with POI data need to be stored in a folder named myPOIs that is located in the root directory of the USB drive.
Page 140 Navigation After the import is finished, the Detailed descriptions on POIs stored imported POIs are selectable as in the myPOIs memory, see destinations via the Enter "Exporting and importing POI data" destination menu, see chapter above and chapter "Destination input" "Destination input"...
Page 141 Navigation After selecting the desired option, the list of POI categories is displayed again. If you selected Announce POIs early for a category, the regarding list entry is now set to <On. If you selected Announce POIs late for a category, the regarding list entry is now set to On>.
Page 142 Navigation ■ Address book: selection of a Infotainment system. See destination address stored in the "Selecting a point of interest" address book. See "Selecting an below. address from the address book" ■ Select from map: selection of a below. destination from the map display See also "Storing an address in the using the eight-way switch 3 76.
Page 143 Navigation Description on route guidance, see chapter "Guidance" 3 158. Entering an address directly Press the DEST button and then select Enter address to open the menu shown below. To start a search for petrol stations Below the list detailed information on close to the vehicle's current position: the currently marked petrol station is select Petrol stations.
Page 144 Navigation j : List function - once two letters have been entered (in some cases just one letter), all names available with these letters are displayed. The more letters are entered, the shorter becomes the list. OK : Complete entry or accept search term.
Page 145 Navigation After completing the address, select The Navigation menu is displayed. Starting route guidance Select Start navigation to start route guidance to the displayed address. Description on route guidance, see chapter "Guidance" 3 158. Storing the address Select Store if you want to store the displayed address in the address Select the desired address book A list of the most recently used...
Page 146 Navigation The Store menu is displayed, see Select the desired option. A menu "Storing an address in the address with various sorting options is book or myPOIs memory" below. displayed. Selecting an address stored in the myPOIs memory Press the DEST button and then select myPOIs to open the menu shown below.
Page 147 Navigation Selecting a point of interest Select Automotive & Petrol Stations. Press the DEST button and then A menu is displayed that provides select Points of Interest. options for further refinement of the petrol station search. A menu with various options for the selection of points of interest (e.g.
Page 148 Navigation After marking the desired fuel types: select Start search with selected filters or, for further refinement of the search, select Continue with next filter (petrol station brands/chains). After starting a search, a list of all petrol stations that meet the previously selected filter criteria is displayed.
Page 149 Navigation Along freeway Search by name Selection of motorway related points Selection of points of interest by of interest (e.g. petrol stations or entering a name. service areas) along the route. Only After selecting the option, a country available when you are currently list is displayed.
Page 150 Navigation Once the entry is specific enough, a Description on route guidance, see list with possible points of interest is chapter "Guidance" 3 158. displayed. Sometimes it may be Storing the address necessary to select j for displaying Select Store if you want to store the the list.
Page 151 Navigation Description on route guidance, see chapter "Guidance" 3 158. Storing the address Select Store if you want to store the displayed address in the address book or myPOIs memory. The Store menu is displayed, see "Storing an address in the address book or myPOIs memory"...
Page 152 Navigation Entering the Longitude coordinate Storing an address in the destinations), see regarding 1. Select Longitude. descriptions on address input or address book or myPOIs selection above. memory 2. Turn the multifunction knob to select W or E (west or east of the After entering or selecting the desired The Infotainment system provides prime meridian in Greenwich).
Page 153 Navigation A telephone number can be entered Select OK to store the destination Editing or deleting a stored optionally. address in the address book using the address displayed name and category. The default category Private can be Address data (including the category changed to Business: A maximum of 100 destination and telephone number) stored in the...
Page 154 Navigation The following options are available: by simply saying the assigned Editing or deleting Individual POIs name, see chapter "Speech Select Individual POIs, select the ■ Address: opens the Enter address recognition". desired sorting option (e.g. Vicinity menu. You can edit the displayed current position), select the desired address using the speller function, ■...
Page 155 Navigation regarding address book entry or Setting the home address myPOIs entry (selectable via Before you can set an address as Individual POIs). home address, you need to store this address in the address book or ■ Or you can import updated address myPOIs memory, see corresponding data from a USB drive, see descriptions above.
Page 156 Navigation If you want to set the address of an Various options for the selection of Adding a tour imported POI as home address: points of interest based on travel guide criteria (e.g. accommodation, You first need to store the address in sights, leisure etc.) are displayed.
Page 157 Navigation Adding intermediate destinations to Select an option for destination input the tour and then select/enter the desired intermediate destination 3 140. A menu is displayed that shows the address data of the selected/entered intermediate destination. Accept the entered name using OK. The name is displayed on the Tours menu.
Page 158 Navigation Starting a tour To start route guidance: select Start tour. All predefined intermediate destinations are taken into account for route calculation. If you want to skip predefined intermediate destinations on the tour and start direct route guidance to a certain destination: select Start tour from.
Page 159 Navigation Guidance Editing a tour To insert the cut out destination at the end of the list: press the multifunction Select a tour in the Tours menu and Press the NAVI button and then the knob again. then select Edit tour to display a multifunction knob to display the submenu with the following options: To insert the cut out destination...
Page 160 Navigation ■ Edit: change/edit the displayed Select a TMC traffic message to address, see "Editing or deleting a display detailed information on the stored address" in chapter related traffic issue. "Destination input" above. Navigation options ■ Route criteria: set/change criteria The corresponding menu provides for route calculation, see options and a multitude of relating...
Page 161 Navigation Note For each trip the following data will any time to a USB drive connected to The logbook function of the automatically be recorded: the USB port 3 122 of the Infotainment system meets no Infotainment system. ■ A unique serial number for the trip official legal requirements.
Page 162 Navigation a "1", see "Sample logbook data" ■ Export logbook: exports all Description of the individual data below. recorded trip data currently stored items: in the Infotainment system's ■ Set filename: using the speller ■ 0000000023 = serial number memory to a USB drive connected function (see chapter "Destination ■...
Page 163 Navigation Route criteria The selected settings will be taken Select Dynamic guidance to activate/ into account for route calculation, if deactivate dynamic route guidance. The calculation of the route can be Economic is currently selected, see If dynamic route guidance is controlled by various criteria.
Page 164 Navigation If desired select one or several of the Using the Highway lane guidance If Highway lane guidance is activated following options in the Route option, you can determine which type the following type of illustration will be criteria menu: of illustration should be displayed displayed: when reaching a highway...
Page 165 Navigation Using the Popup information option, Select between map orientation ■ Latitude you can select whether route (North up/Head up) and dimension ■ Longitude guidance information from the (2D/3D) on the map display (3D only ■ Map display navigation should be displayed in available for Navi 900).
Page 166 Navigation Functions for active route Select whether All traffic messages or ■ Destination information only Traffic messages along route guidance ■ Overview current route should be displayed in the TMC Route list messages list, see below. Stop navigation All streets on the calculated route are After selecting Stop navigation, the Navigation options listed with the related distances.
Page 167 Navigation Destination information Route blocking Description, see "Functions with The following options are available to route guidance inactive" above. manually exclude certain areas/route sections from the route guidance: Overview current route The following information on the current route is displayed: To exclude a street from the route guidance: Mark the regarding street name and...
Page 168: Dynamic Guidance
Navigation By distance Remove all route blockages Nearby traffic problems are also By setting a distance the section of After selecting this option, all areas/ reported if route guidance is not route from the current position to the route sections previously selected as active.
Page 169: Map Sd Card
Infotainment system is based on data Vauxhall Authorised Repairer. ■ Do not store the SD card in that the system receives via the RDS- Replacing a map SD card, see below .
Page 170 Navigation Removing the SD card Inserting the SD card Press on the inserted SD card to Push the SD card with the cut-out unlock it, and then carefully pull the edge on the right side (see image SD card out of the SD card slot. above) carefully into the SD card slot until the card engages.
Page 171 Navigation Symbols overview...
Page 172 Navigation Explanation Explanation Current position Closed list Destination Shopping centre not available Toll road not available Tourist information not available Sight Sport & leisure Road works Going out Slippery road Museum Smog Car rental Snow Travel information Storm Leisure activity Caution/warning Provision of services Closed road...
Page 173 Navigation...
Page 174 Navigation Explanation Explanation Chemist Petrol station Cinema Service area Airport Restaurant Amusement park City Historical monument Bank Hospital Traffic message Emergency Ferry Police Border Harbour Tunnel Mountain pass Kiosk Public place Grocery Related to the car Hotel/motel Garage Motorway exit Cemetery Car park Park &...
Page 175 Speech recognition Speech recognition General information from this, the speech recognition acknowledges important commands The speech recognition of the and will enquire if necessary. Infotainment system enables you to To ensure that conversations inside operate various functions of the General information ....174 the vehicle do not lead to navigation system (only Navi 900;...
Page 176: Navigation Control
Speech recognition To be able to enter voice Note most important commands currently commands in English, you first If you change the language shown available is shown on the display, see need to activate the phone main on the Infotainment system's "Help menus"...
Page 177 Speech recognition Cancelling a dialogue sequence Afterwards, the current dialogue Help menus sequence will be continued Dependent on the currently active There are various possibilities to automatically. mode of operation (radio, CD player, deactivate the speech recognition navigation etc.), a help menu with the and to cancel a dialogue sequence: Important notes on voice input most important available voice...
Page 178 Speech recognition ■ One of the commands shown on Example: General help menu (main You can simply try out if there are the help menu. commands) shortened variants available for The general help menu primarily certain commands. ■ One of the additional commands shows the commands required to available for the radio mode, see ■...
Page 179 Speech recognition <87.5..108.0>", you need to Example: Autostore lists On-screen messages and acoustic exchange "<87.5..108.0>" for a prompts / feedback specific figure between 87.5 and During dialogue sequences you are 108.0. You could say, e.g., often prompted via on-screen "Frequency 96 dot 3". messages (see image below) and voice output messages, which kind of Help messages...
Page 180 Speech recognition As soon as you hear a beep and the System: "Radio". Selecting a preset station symbol in the upper right corner of the Action: the user wants to select a System: activates the radio mode. on-screen message (see image station stored in the second autostore To perform a certain radio function via above) has changed its colour from...
Page 181 Speech recognition After assigning a name to a station, Selecting a preset station via the Selecting a track on an audio CD you can select that station by simply assigned name User: activates speech recognition. saying the assigned name. User: "All tracks". Note Action: the user wants to assign a If you use a name which was...
Page 182 Speech recognition User: "Points of interest". Entering an address Action: user wants to enter the System: shows a list with search destination address for an upcoming options. trip. User: "Nearby". User: activates speech recognition. System: shows a list with points of User: "Enter destination"...
Page 183 Speech recognition Note System: displays an alphabetically destination" to store the displayed The last calculated destination ordered list of street names that address in the address book or possibly has no valid address sound similar to the name the user myPOIs memory, see chapter elements available that can be used said.
Page 184 Speech recognition Example: the language of the Afterwards you can select one of Note Infotainment system is set to English, these destination addresses by If you change the language shown Country is set to "GERMANY (D)", simply saying the assigned name. on the Infotainment system's and you want to enter the city name display, all names currently...
Page 185: Phone Control
Speech recognition Infotainment system (e.g. the RADIO ■ Do not enter (say) any commands ■ "Delete" button) or the SRC (Source) button on for some time. ■ "Directory" the steering wheel. ■ After the third unrecognised ■ "Pair" command. ■ "Select device" Phone control Operation ■...
Page 186 Speech recognition Recognition works best, if a pause of without knowing the prefix for calls ■ "Help" at least half a second is made after made abroad in that country. Then ■ "Cancel" every three to five digits. The say the required country code. Example of a dialogue Infotainment system then repeats the Example of a dialogue...
Page 187 Speech recognition ■ "Redialing" both name inputs, otherwise the Voice output: "Please, say the speech recognition will reject the number to save" ■ "Help" inputs. (for number input see the dialogue ■ "Cancel" A maximum of 50 voice tags can be example for Entering a telephone Example of a dialogue stored in the telephone book.
Page 188 Speech recognition Listening to stored names Voice output: "Do you want to add or User: "Yes" delete a device?" The voice output of all stored names Voice output: "Do you want to pair the (voice tags) is started with the User: "Add"...
Page 189 Phone Phone General information Important information for operation and traffic safety The Phone portal provides you with the possibility of having mobile phone 9 Warning conversations via a vehicle General information ....188 microphone and the vehicle Mobile phones have effects on Bluetooth connection ....
Page 190 Phone Controls on steering wheel: Navi 600 / Navi 900 phones is prohibited, if q, w: take call, activate speech interference is caused by the Bluetooth menu recognition. mobile phone or if dangerous situations can occur. n, x: end/reject call, deactivate speech recognition.
Page 191 Phone Device list Handsfree mode Connecting a mobile phone as a When the mobile phone is added as handsfree device When a mobile phone is connected to a handsfree device the user can the Phone portal via Bluetooth for the make or receive calls and use other first time, the mobile phone is saved functions via the Phone portal.
Page 192 Phone As soon as the Phone portal has Select Change Bluetooth code. On Select the desired mobile phone from detected the mobile phone, the the menu displayed, edit the actual the list. The SAP passcode prompt is connection set-up can be confirmed. Bluetooth code and accept the shown on the Infotainment display modified code using OK.
Page 193 Phone Enter the displayed SAP passcode in Connecting a mobile phone saved in Removing a mobile phone from the the mobile phone (without spaces). the device list device list The mobile phone PIN code is shown Select the desired mobile phone from on the Infotainment display.
Page 194 Phone The security dialogue is displayed. ■ Call diverting: select diverting CD 300 / CD 400plus options depending on the situation. Activating/Deactivating PIN request Bluetooth menu ■ Call barring: configure call barring Select PIN request On or Off. options depending on the situation. Enter the PIN code of the mobile For details on network services phone SIM card and confirm.
Page 195 Phone Device list Handsfree mode Connecting a mobile phone as a When a mobile phone is connected to When the mobile phone is added as handsfree device the Phone portal via Bluetooth for the a handsfree device the user can first time, the mobile phone is stored make or receive calls and use other in the device list.
Page 196 Phone As soon as the Phone portal has Select Change Bluetooth code. On Select the desired mobile phone from detected the mobile phone, the the menu displayed, edit the actual the list. The SAP passcode prompt is connection set-up can be confirmed. Bluetooth code and accept the shown on the Infotainment display modified code using OK.
Page 197 Phone Enter the displayed SAP passcode in Connecting a mobile phone saved in Removing mobile phone from device the mobile phone (without spaces). the device list list The mobile phone PIN code is shown Select the desired mobile phone from on the Infotainment display.
Page 198 Phone Emergency call The security dialogue is displayed. ■ Call diverting: select diverting options depending on the situation. Activating/Deactivating PIN request ■ Call barring: configure call barring 9 Warning Select PIN request On or Off. options depending on the situation. Enter the PIN code of the mobile Connection setup cannot be For details on network services...
Page 199 Phone Operation the mobile phone is possible via the functions are active. You can Infotainment system only to a limited enquire about this with the local extent. Introduction network operators. Not every telephone supports all As soon as a connection via The emergency call number can functions of the Phone portal.
Page 200 Phone Dialling a telephone number Entering a number manually If the SIM card or telephone are different, the telephone book is reloaded. This process can take a few minutes depending on the phone model. Selecting a telephone number from the telephone book With the telephone main menu active, Select Enter number, then enter the press the multifunction knob to open...
Page 201 Phone Call lists Messaging functions Note Telephone book entries are carried Via the menu Call lists the incoming, When the mobile phone is paired over as they are transferred from the outgoing and missed calls can be using the SAP mode, messages can mobile phone.
Page 202 Phone Incoming call ■ Switch calls: switch between calls, Dialling a telephone number if there are several calls. When there is an incoming call a menu is displayed for you to accept or ■ Mute call: mute a call. decline the telephone call. Note Select the required option.
Page 203 Phone Entering a number manually If the SIM card or telephone are different, the telephone book is reloaded. This process can take a few minutes depending on the phone model. Selecting a telephone number from the telephone book Note Telephone book entries are carried Select Enter number and then enter over as they are transferred from the the desired number sequence.
Page 204 Phone Call lists Incoming call When there is an incoming call a menu is displayed to accept or decline the telephone call. Select required option. Functions during a telephone call If you currently have a telephone call, press the multifunction knob to open a submenu.
Page 205 Phone ■ Switch calls: switch between calls, Recommendations for fault-free For reasons of safety, do not use the if there are several calls. operation: phone while driving. Even use of a handsfree set can be a distraction ■ Mute call: mute a call. ■...
Page 206 Phone...
Page 207 Index Activating CD player....116 Emergency call......197 Activating speech recognition..Enhanced Other Networks..107 ........175, 184 EON..........107 Activating the navigation system 130 Activating the radio....... 98 Favourite lists......100 Address book......140 Address input......140 Autostore lists....... 99 General information....
Page 208 myPOIs........140 control elements...... 188 myPOIs announcement..130 dialling a number..... 198 Maps .......... 168 navigation display....130 emergency calls...... 197 Map SD card navigation options....158 functions during a call..... 198 handling........168 navigation volume....130 handsfree mode...... 189 replace........
Page 209 Regionalization......107 Retrieving stations....99, 100 Theft-deterrent feature ....75 Route guidance....158, 167 Tone settings........ 91 Traffic announcements....94 SAP mode........189 SD card........168 Updating station lists....102 Selecting the waveband....98 Usage..85, 98, 116, 120, 126, 130 Setting the navigation volume..

This manual is also suitable for:

Astra 2014

Vauxhall Cascada 2014 Owner's Manual

Introduction 7

74 Introduction Introduction General Information

Quick Links

Chapters

Related Manuals for Vauxhall Cascada 2014

Summary of Contents for Vauxhall Cascada 2014

This manual is also suitable for:

Table of Contents