Using Zoom - Pace TDC778X Operator's Manual

Using "Zoom" to change the picture
Making the appropriate TV Aspect Ratio and TV Display Capability settings (see pages 21 through
27) should ensure that the picture on your TV screen is not distorted (stretched or squashed) and
that it fills as much of the screen as possible.
However, even if you have selected the correct settings, there will be times when a program appears
with black borders either at the top and bottom or at the sides of the picture (or sometimes even all
the way round the picture). This happens because the aspect ratio (shape) of the transmitted program
does not match the aspect ratio of your HDTV, or because the transmitted programme includes
black borders as part of the transmission (see right).
Your remote control should have a "zoom function" button (could be labelled Zoom or Aspect),
which you can use to change the TV picture until it appears as you want it to:
1. Press the "zoom function" button once to change the display.
2. Press it again to change the display again. Continue to press it in this way until the picture appears
as you want it to.
Note: The effect that this button has on transmissions depends on the transmission itself. On some
transmissions it may have no effect at all.

USING ZOOM

A 4:3 transmission, with
a 16:9 picture. Dark bars
are added at the top and
bottom of the transmission
A 16:9 transmission,
with a 4:3 picture in it.
Dark bars are added
at the sides of the
transmission