Pace TDC778X Operator's Manual page 11

CABLE IN
Connect the cable service here.
TO TV Connect to the RF/antenna input on your TV or
VCR (optional).
VIDEO OUT
Connect to the video composite input on your
VCR (or a standard TV).
AUDIO OUT
Connect to the L and R audio inputs on your
stereo TV, stereo VCR or optional stereo amplifier.
Separable security
Removal will interrupt your service.
module
(behind cover)
COMPONENT If your HDTV does not have an HDMI (see
VIDEO below), connect your HDTV here.
S-VIDEO Connect to the S-video input (if present) on your
VCR or TV.
IR RECEIVE Connect to an optional remote "eye".
IR TRANSMIT Connect to an optional VCR controller (future use).
USB Connect to compatible optional equipment that
(Universal Serial supports a USB 2.0 interface (future use).
Bus)
REAR PANEL (cont.)
HDMI
If your HDTV has an HDMI, connect it here for
(High Definition a digital audio/video connection (instead of
Multimedia using the AUDIO and 3 analog COMPONENT
Interface) VIDEO connectors).
ETHERNET Connect to an optional PC network (future use).
SATA Connect to an optional external hard disk.
1394 Connect to 1394-compatible devices.
DIGITAL AUDIO Connect to the electrical digital audio input on
OUT optional digital audio equipment, such as an audio
decoder or home theater receiver.
OPTICAL AUDIO Connect to the optical digital audio input on
OUT optional digital audio equipment.
POWER OUTLET Connect your TV's power cord here to provide
AC power to your TV.
POWER INPUT Connect your set-top's power cord here.