Blf Subscription Period - Mitel 6800i Series Administrator's Manual

Mitel 6800i Series SIP Phone Release 4.0.0 SP1 Administrator Guide
CONFIGURING RING SPLASH SETTINGS
Use the following parameters to configure the ring splashsettings:
CONFIGURATION FILES
To set the ring splash on a per key basis in the configuration files for BLF, see Appendix A, the
sections
"Ring Splash Settings"

BLF SUBSCRIPTION PERIOD

Note: Applicable to the 6865i, 6867i, and 6869i IP Phones only.
On the IP phones, you can set the time period, in seconds, that the IP phone re-subscribes the
BLF subscription service.
In the configuration files, enter the following parameter with a valid value to set the BLF
subscription period:
sip blf subscription period: <value in seconds>
The minimum value for this parameter is 120 seconds (2 minutes) and the maximum is
2147483647 seconds. The default is 3600 (1 hour). The phone resubscribes to the BLF
subscription service before the defined subscription period ends.
You can configure this feature using the configuration files or the Mitel Web UI.
Note: The "sip blf subscription period" parameter is not applicable to BLF/List
subscriptions.
CONFIGURING BLF SUBSCRIPTION PERIOD
Use the following procedures to configure the BLF subscription period on the IP phone.
CONFIGURATION FILES
To configure the BLF subscription period on the IP phones using the configuration files, see
Appendix A, the section,
5-158
on .
page A-254
on
"Advanced SIP Settings"
.
page A-93