Mitel 6800i Series Administrator's Manual page 191

and the PC Port VLAN ID to any ID from 1 to 4094. The following example sets the PC
port to be on VLAN 3 but the LAN port is configured as untagged.
6. Choose a VLAN Protocol (SIP Priority, RTP Priority, and/or RTCP Priority), and select
a priority for the associated Protocol. Valid values are 0 to 7, Defaults are as follows:
• SIP Priority = 3
• RTP Priority = 5
• RTCP Priority = 5
To set VLAN ID and priority for the PC Port (Port 1):
7. Enter a VLAN ID value from 1 to 4095 in the VLAN ID field. Default is 4095.
Note: Setting the PC Port VLAN ID to 4095 and LAN Port VLAN ID to any ID from
1 to 4094 will allow frames from the LAN port (containing a VLAN ID) to be untagged
before being forwarded to the PC port and frames from the PC port (without a VLAN
ID) to be tagged with the configured VLAN ID before being forwarded to the LAN port.
Example:
You enable tagging on the phone port as normal but set the PC Port VLAN ID to 4095 and
the LAN Port VLAN ID to any ID from 1 to 4094. The following example sets the LAN port
to be on VLAN 3 but the PC port is configured as untagged.
Network Settings
4-46