Mitel 6800i Series Administrator's Manual page 175

For the 6863i/6865i:
IP PHONE UI
1. Press on the phone to enter the Options List.
2. Select Administrator Menu.
3. Select Configuration Server.
4. Select HTTPS Settngs.
Configure HTTPS Client:
5. Select HTTPS Client.
6. Select Client Method.
7. Press Change to select a client method to use for HTTPS. Valid values are:
• SSL 3.0 (default)
• TLS 1.0
8. Press Done to save the changes.
Configure HTTPS Server:
9. Select HTTPS Server.
10. Select HTTP->HTTPS.
11. Press Change to select "Yes" or "No". Default is "No".
Enabling this feature redirects the HTTP protocol to HTTPS.
12. Press Done to save the changes.
13. Select XML HTTP POSTs.
14. Press Change to select "Yes" or "No". Default is "No".
Enabling this feature blocks XML HTTP POSTs from the IP Phone.
15. Press Done (4 times) to finish.
Note: The session prompts you to restart the IP phone to apply the configuration
settings.
16. Select Restart.
For the 6867i/6869i:
IP PHONE UI
1. Press on the phone to enter the Options List.
2. Press the Advanced softkey.
3. Enter the Administrator password using the keypad. Default is "22222".
4. Select Configuration Server.
Network Settings
4-30