Table of Contents
Advertisement
Practical information
12 v battery
Procedure for starting the engine using another battery or charging a discharged battery.
the presence of this label, in particular
with the Stop & Start system, indicates
the use of a 12 V lead-acid battery with
special technology and specification;
the involvement of a CITROËN dealer
or a qualified workshop is essential
when replacing or disconnecting the
battery.
After refitting the battery, the Stop &
Start system will only be active after a
continuous period of immobilisation of the
vehicle, a period which depends on the
climatic conditions and the state of charge
of the battery (up to about 8 hours).
288
Access to the battery
The battery is located under the bonnet.
For access to the (+) terminal:
F release the bonnet using the interior lever,
then the exterior safety catch,
F raise the bonnet and secure it with its stay,
F lift the plastic cover for access to
the (+) terminal.
Starting using another
battery
When your vehicle's battery is discharged, the
engine can be started using a slave battery
(external or on another vehicle) and jump lead
cables.
First check that the slave battery has a
nominal voltage of 12 V and a capacity
at least equal to that of the discharged
battery.
Do not try to start the engine by
connecting a battery charger.
Do not disconnect the (+) terminal when
the engine is running.
Advertisement
Table of Contents
