Warning / indicator lamp
State
fixed.
Automatic
headlamp
dipping
fixed.
fixed.
Front foglamps
fixed.
Rear foglamps
For more information on the lighting controls, refer to the corresponding section.
Cause
The lighting control stalk is in the
"AUTO" position, pulled towards
you, and the function is activated
("Driving assistance" menu).
The system is in dipped beam mode
as there is sufficient ambient light
and/or the traffic conditions do not
allow illumination of main beam.
The lighting control stalk is in the
"AUTO" position, pulled towards
you, and the function is activated
("Driving assistance" menu).
The system is in main beam mode
as the ambient lighting and traffic
conditions allow it.
The front foglamps are switched on
using the ring on the lighting control
stalk.
The rear foglamps are on.
Action / Observations
The camera, located in the door mirror, manages the
operation of main beam, depending on the ambient
lighting and driving conditions.
Pulling the lighting stalk again to deactivate.
For more information on this function, refer to the
Visibility section.
Turn the ring on the lighting control stalk rearward
twice to switch off the front foglamps.
Turn the ring on the stalk rearward to switch off the
rear foglamps.
Monitoring
1
27