Driving
Display in the
Symbol
instrument panel
When the active cruise control is automatically paused, it can only be reactivated when safe conditions are restored. The message "Activation
not possible, conditions unsuitable" is displayed while reactivation is not possible.
When the conditions allow, it is recommended that the function be reactivated by pressing button 2 or 3, which will make the current speed of
your vehicle the new cruise speed setting, rather than by pressing button 4 (on/pause) which reactivates the cruise control using the old cruise
speed setting, which may be very different from the current speed of your vehicle.
170
Associated message
Comments
When the adjusted speed reaches the control limit (speed setting - 20 mph
"sPeed adJusted"
(30 km/h)), the adjusted speed flashes together with the speed setting, to signal that
automatic deactivation of the system is imminent.
If the system exceeds the limit of speed adjustment possible by the system and
"Cruise control
paused".
in the absence of any reaction by the driver (operation of the direction indicator,
change of lane, reduction of the speed of the vehicle), the system is automatically
paused.
The display of the deactivation message is accompanied by an audible signal.