Adjusting The Multicontour Seat - Mercedes-Benz GLE Coupe Operator's Manual

Seats
98
Removing and installing the rear seat
head restraints
Example: center head restraint
Center head restraint only: pull the head
X
restraint up as far as it will go.
To remove: press release catch : and pull
X
the head restraint out of the guides.
To re-install: insert the head restraint so that
X
the notches on the bar are on the left when
viewed in the direction of travel.
Push the head restraint down until you hear it
X
engage in position.
Adjusting the angle of the rear seat
backrests
You can adjust the angle of the backrests in the
second row of seats. There are several possible
detent positions.
Pull the left or right release lever ; upwards
X
in the direction of the arrow until relevant
backrest : is fully released.
Pull backrest : forwards in the direction of
X
the arrow and allow it to engage.
To ensure that the backrest has engaged, lean
X
firmly against backrest :.

Adjusting the multicontour seat

The multicontour seat can be adjusted via the
multimedia system (see the separate operating
instructions).
Adjusting the 4-way lumbar support
Raises the backrest contour
:
Softens the backrest contour
;
Lowers the backrest contour
=
Hardens the backrest contour
?
You can adjust the contour of the front seat
backrests individually to provide optimum sup-
port for your back.
Switching the seat heating on/off
Switching on/off
G
WARNING
Repeatedly switching on the seat heating can
cause the seat cushion and backrest pads to
become very hot. The health of persons with
limited temperature sensitivity or a limited
ability to react to excessively high tempera-
tures may be affected or they may even suffer
burn-like injuries. There is a risk of injury.
Therefore, do not switch the seat heating on
repeatedly.