Sharp MX-5500N Troubleshooting Manual page 6

(1) Paper misfeed in the finisher / saddle stitch
finisher
Paper misfeed in the transport area and the output
area (the saddle stitch unit)
(A)
(B)
4
Open the top cover and
remove the misfed paper.
Open the front cover.
Move lever (A) to the right
and remove the misfed
paper. Release the lever and
it will return to the original
position by a spring.
Move lever (B) to the right
and remove the misfed
paper.
Return the lever to the
original position after
removing the misfed paper.
(A)
(B)
(2) Paper misfeed in the punch module
Rotate roller knob (A) until it
no longer turns.
Push and rotate knob (B) and
remove the misfed paper.
Turn knob as shown in the
illustration.
Open the top cover and
remove the misfed paper.
If the paper cannot be
removed by opening the top
cover, open the punch
module cover and remove
the paper.