Mitel 6865i User Manual page 33

For per-line configuration
4. In the Ring Tone section, select a line for which you want to set ring tone.
5. Select a value from the LineN field.
Note: See the
6. Click Save Settings.
INSTALLING CUSTOM RING TONES USING THE MITEL WEB UI
MITEL WEB UI
Notes:
1. Access to the Custom Ringtones Web UI menu is only available if enabled by your
System Administrator.
2. Ringtones must be in .wav format. The IP phones support the following WAV file
specifications:
G.711 μ-law and a-law Codec
•
• 20 ms packet size
• Mono 8KHz
3. Individual WAV files cannot exceed 1 MB in size (the total combined size of the eight
WAV files cannot exceed 8 MB).
4. Filenames must contain only ASCII characters.
1. Click on Basic Settings > Custom Ringtones
2. Press the Browse... button corresponding to the desired ringtone position (e.g. 1).
3. Navigate to the folder containing the WAV file you want to upload, select the file using your
left mouse button, and press the Open button.
The filename should now be displayed to the right of the respective Browse... button.
4. Press the Upload button to upload the file to the phone.
"Ring Tones" on page 27
Customizing Your Phone
for valid values.
31