Ending Calls - Mitel 6865i User Manual

Mitel 6865i SIP Phone Release 4.1.0 User Guide
Joining Additional Parties to Active Conferences
In centralized conferencing, you can join multiple incoming or outgoing calls to active
conferences. Before following this procedure, at least one active conference must exist on your
phone.
IP PHONE UI
1. As Party 1, pickup the handset or press the
2. Call Party 2 by dialing their number (or answer an incoming call of a Party).
3. Wait for Party 2 to answer. When Party 2 answers, you can consult with them before adding
them to the conference.
4. Press the
5. Press the Line key that has the active conference.
6. Press the
ENDING A CONFERENCE AND TRANSFERRING REMAINING PARTIES
The 6865i allows a host to drop from a 3-way conference and let the other two parties remain
connected. If you are the host of a conference and want to leave that conference press the
Leave key on the phone. Your phone leaves the 3-way conference but the remaining parties
are still connected to the conference.
Note: The Caller ID of the dropped host still displays on the remaining parties' phones.

ENDING CALLS

IP PHONE UI
To end a call, you first need to connect or reconnect to the call if not already connected (for example,
if your caller is on hold). Press
can also place the handset back on hook to end the call.
126
key.
key again to join the parties to the active conference.
to end the call. If connected through the handset, you
key.
3