Status Lamps For Line And Call Appearances; Speaker And Mwi Status Lamps; Speaker - Aastra 9133i User Manual

Chapter 2, Getting Started
•
The lamps associated with the line or call appearance provide status.
•
Either one of the keys can be used to place a call from that directory number. The
destination will always display the directory number of the line appearance as the
originating directory number.
•
Line/call appearance assignments on these keys are L4 – L9.
•
An incoming call will ring in on the line appearance where the directory number is
assigned. If that line is busy, it will ring in on the associated call appearance. If both
the line appearance and the call appearance are busy, the call follows the call forward
busy destination.
•
If both the line and call appearance are busy, and there is no call forward busy
destination assigned, the caller hears busy tone.

Status Lamps for Line and Call Appearances

Activity
Idle
Connected
Ringing
On Hold

Speaker and MWI Status Lamps

The Speaker lamp and the Message Waiting Indicator (MWI) lamp provide visual status
indications.

Speaker

The speaker lamp is located beside the Speaker key.
Speaker LED Status
On Solid
Slow Flash
Μ
6
Μ
Lamp Description
Off There is no call activity on this line/call
appearance.
Solid A call is connected to the phone on this line/call
appearance.
Fast Flash A call is ringing in on this line/call appearance.
Slow Flash A call is on hold on this line/call appearance.
Description
You are in Speaker mode.
You are in Headset mode.
Aastra – 2758-002