Bosch ICP-EZM2 Easy Series System Reference Manual page 9

Easy Series
Callouts for Figure 1.2 Page 8 and Figure 1.3, Page 8
1 Port for ICP-EZRU-V3 ROM Update Key and Programming Key
2 Enclosure Cover and Wall Tamper Switch
3 Ground connection
Connect ground wire from enclosure to enclosure door.
4 Module mounting location
ITS-DX4020-G shown.
5 Module mounting location
DX2010 shown.
6 System test button
When the system is completely installed and programmed, press the system test button to start a full system
test.
7 Port for ICP-EZVM voice module
8 Enclosure terminal cover (ICP-EZM2-R Enclosure only)
Shipped in hardware bag. Install over terminals when power supply wiring is completed.
Bosch Security Systems, Inc. System Reference Guide
Overview | en 9
F01U087835 | 02 | 2008.10