Overview; Installation Workflow; System Components And Wiring - Bosch ICP-EZM2 Easy Series System Reference Manual

6 en | Overview
1

Overview

This document contains instructions for a trained installer to properly install, configure, and
operate the Easy Series control panel, and all optional peripheral devices.
You will install and configure the system using the figures starting in Section 1.2 System
Components and Wiring, page 6 and the information in Section 2 System Installation and
Configuration, page 12. The sections following Sections 1 and 2 provide supporting details for
installation, configuration, testing, and support.
1.1

Installation Workflow

To properly install, configure, and test the system, use the following workflow:
Step
1. Plan the Installation
2. Install the Hardware
3. Perform RFSS Site Test
4. Configure the System
5. Program the System
6. Test the System
Table 1.1 Installation Workflow
1.2

System Components and Wiring

Refer to Figure 1.1 through Figure 1.3 for overviews of the system components and wiring.
1
2
ISW-BHB1-WX
3
DX2010
4
DX4020
5
ITS-DX4020-G
Figure 1.1 System Component Wiring Overview
F01U087835 | 02 | 2008.10
Description
Identify suitable locations for system component in the installation
site.
Install all system components.
Perform radio frequency signal strength (RFSS) test.
Enroll wireless devices into the system, perform basic programming
for the system, and add users to the system.
Update the system with expert programming.
Perform a full system test. Ensure that the central monitoring station
received test reports.
IUI-EZ1
+
-
R
Y
G
B
R
Y
G
B
R
Y
G
B
R
Y
G
B
R
Y
G
B
T
T
System Reference Guide
(+) (-)
(-)
(+)
9
6
(+)
(+)
(-)
10
(+) (-)
7
8
(+) (-) (+) (-) (+) (-)
Easy Series
Page
Page 12
Page 13
Page 18
Page 22
Page 33
Page 61
ICP-EZPS
11
12
Bosch Security Systems, Inc.