Wlsn Relay Module - Bosch ICP-EZM2 Easy Series System Reference Manual

Easy Series
10.14

wLSN Relay Module

The wLSN Relay Module allows the control panel to control external devices through a Form C
relay. This module also provides a supervised point for monitoring external devices.
Auxiliary power input terminals are also provided to supplement battery power when relay use
is high.
A cover-and-wall tamper switch transmits a tamper signal when the cover is removed from its
base, or when the unit is pulled away from the wall.
An LED provides status for RFSS and Discovery Modes.
Specifications
868 MHz
915 MHz
Wire Gauge
Power
External Power Source
(optional)
Terminal Blocks
Relay Output
EN50131-1
NOTICE!
i
The external power option is intended to be used as a supplemental (secondary) source of
power only. Do not operate the Relay Module without the batteries.
Bosch Security Systems, Inc.
ISW-BRL1-WX
ISW-BRL1-WY
0.14 mm to 1.5 mm
Four AA batteries, 1.5 V alkaline
12 VDC nominal, 6 VDC to 14 VDC
DC+ and DC -
PT + and PT - (input)
NO, C, NC (output)
2A at 30 VDC (resistive load)
Security Grade 2, Environmental Class II
System Reference Guide
Device Specifications and Overview | en
External power source, 12 VDC nominal,
6 VDC to 14 VDC
Input, supervised sensor loop
Relay output for control of external devices.
89
F01U087835 | 02 | 2008.10