Advertisement
REAR PANEL FACILITIES
@ FM/AM ANTENNA terminals
Antennas must be connected to these terminalis: otherwise
you will not be able to receive stations. See page 4 for
details on ANTENNA CONNECTIONS.
@® TUNER flat cable
Connect to the TUNER jack of the cassette deck amplifier.
Double Deck Amplifier: DC-J210/DC-J110
'|
@ AC INLET jack
Connect the power cord here.
@ SURROUND
SPEAKERS jacks
Connect the surround speaker systems.
NOTE:
Connect a speaker system having a nominal impedance of
16 Q or more.
@® SPEAKERS terminals
L: Connect the left speaker systems as seen from the listen-
ing position,
NOTE:
Connect a speaker system having a nominal impedance
ranging from 6Q to 16.2.
@ TUNER jacks
Connect the tuner flat cable here.
© CD jacks
Connect to a compact dise player PD-J210T or PD-J215M
flat cable.
© VCR IN/OUT jacks
IN:
Connect to audio output jacks of VCR.
OUT:
Connect to audio input jacks of VCR.
@ PHONO input jacks
Connect the audio cord of the turntable to these jacks. -
Ground terminal (GND)
Connect the ground cord of the turntable here {except for
PL-J210).
®© TURNTABLE (DC 12V OUTPUT) jack
This jack supplies power to the turntable PL-J210.
Connect the power supply cord of the turntable to this jack.
vs
<ARB1410>
En
Advertisement
