Advertisement
PANEL FACILITIES
Remote Control Unit
]
@ POWER button
@® FUNCTION button
Use to select the input source. Each time the button is
pressed, the input source changes in the order.
Pr CD - VCR -» PHONO ~ TUNER -+ TAPE 7
As each source is selected, the corresponding indicator
lights.
@® SCAN button
Use when you wish to scan the radio stations stored in the
memory. Each station will be received for about five sec-
onds before moving automatically to the next station.
@ TAPE Il operation buttons
Same as Deck Il operation buttons and Deck Hl contro! but-
tons on the cassette deck amplifier (except Mute).
® SHIFT TAPE I button
To operate Deck 1, press the desired deck operation while
pressing this button.
© Timer operation buttons
SLEEP
: Sets the sleep timer.
SNOOZE:
Turns off power if pressed after timer playback
begins. Timer playback begins again approx. 5
minutes later.
The amplifier input selector automatically
switches to the music source being operated
when you press the CD playback (>), cassette
deck playback (-¢, »), or tuner station controls.
@ VOLUME + (UP}/—- (DOWN) buttons
When pressed, VOLUME on the amplifier is actually moved
by a motor.
SFC MODE button
Use to select one of the preset sound fields. Each time the
button is pressed, one of the preset sound fields will be
selected, in the following order:
r MOVIE - DISCO HALL 7
off* <—
*Set SURROUND & WIDE to off, and set the graphic equaliz-
er to its flat setting,
@ PGM (PROGRAM) MODE button
one of the sound fields will be selected, in the following
order:
A>B+C
off*
*Set SURROUND & WIDE to off, and set the graphic equaliz-
er to its flat setting,
42
<ARB1410>
En
@ CD operation buttons
Perform
the connections
so that the CD player is operated
by the remote control unit.
~
: Play
DISC
: DISC selection
-
: Stop
u
: Pause
bed,
: Track search
Range of remote control
Remote sensor
window
Sea
7m
ly from the sensor window.
Advertisement
