Advertisement
ANTENNA CONNECTIONS
4
i
Wrong
Wrong
Jolo
Radio reception is not possible unless the antenna
is properly connected.
The strength of broadcast signals varies from one area to
another. Signal propagation is especially poor in metropolitan
areas, where there are many tall buildings, and in mountainous
areas. Proper antenna installation is vital to good reception.
FM antenna attachment (Fig.
Connect the accessory FM antenna to the FM terminals. Extend
the antenna out to its full Jength, and affix it to a wall, etc.
External FM antenna installation (Fig. 5)
Use an external antenna when the signals from the station are
weak and cannot be picked up by the accessory FM antenna, or
when the sound heard is accompanied by large amounts of
noise,
Setting up the AM antenna (Fig. [3]
® Insert the clip on the bottom of the antenna into the groove
on the feg.
® Place the antenna on a level surface and rotate it to jocate
the orientation that yields the best reception.
4
<ARB1410>
En
External AM antenna (Fig. [7))
® Indoor AM antenna
Provide a vinyl-coated wire (5 to 6 meters long). Secure one
end to the AM terminal and the other end to a wall or other
high focation.
@ Outdoor AM antenna
If reception is still poér even when a lead antenna has been
fully extended
indoors, stretch out a vinyl-coated wire and
secure it outdoors,
NOTE:
Do not detach the AM loop antenna when using the external
AM antenna.
| ean CHANNEL SWITCH
{100 kHz/10 kHz] position
[50 kHz/9 kHz] position
NOTE:
Advertisement
