Advertisement
| GRAPHIC EQUALIZER CONTROL
ADJUSTING SOUND QUALITY WITH THE
GRAPHIC EQUALIZER
PATTERN
GEO
onor
=
Press the GEQ ON/OFF button to switch on.
e@ The GEQ indicator in the display section lights.
2. Select a frequency with the «<, » CURSOR EQUA-
LIZER buttons.
e
With the «, » buttons, move the *---—" so that it is lit at
the location of the frequency you want to adjust.
3. Adjust the level of equalization with the CURSOR
EQUALIZER UP, DOWN buttons.
©
Press the UP button to increase the level of equalization.
Press the DOWN
button to decrease the level of equa-
lization.
4. Repeat procedures 2 and 3 to create your desired
equalization pattern.
18
<ARBi410>
En
Gea
ONOrr
GEG MODE
aa
HEADPHONES/E:
This is a good equalization pattern to use when
recording tape to listen to on headphones.
1, Press the GEQ ON/OFF button to ON.
@
The GEQ indicator in the display section lights.
2. Select your desired equalization
pattern with the
GEQ MODE button.
Each time the GEQ MODE
button is pressed, one of the
preset equalization patterns is selected, in the following
order:
PA
DBAHCID+E
Ee off (tape
e@
Refer to GEQ MODE
printed indications on the FRONT
PANEL of cassette deck amplifier.
Advertisement
