Door Gasket; Inner, Outer And Cooking Chamber Glass - Electrolux SkyLine PremiumS User Manual

IMPORTANT
For safety reasons, the oven is equipped with a
mechanism to detect the presence of the filter support.
If the filter is not refitted, a message is given indicating
that the filter should be put back in place. After 8 hours
of operation without a filter, the oven will freeze until
the support is refitted.
G.8

Door gasket

The silicone gasket that surrounds the cooking cabinet facade is
an essential element in achieving the desired cooking results
and preventing air, water or steam leakage during oven
operation. The gasket is the most stressed element of the oven
because it is subject to multiple types of stress: thermal,
chemical, physical.
At least once a day (preferably after the washing cycle of the
cooking chamber) carefully clean the facade and the gasket
using a cloth soaked in water.
IMPORTANT
It is necessary to clean the gasket repeatedly during
daily use, especially when cooking temperatures
above 220 ℃ are used. Cleaning the gasket with a
damp cloth during grilled cooking considerably
increases the life of the gasket. Never use abrasive
products to clean the gasket. Do not leave the oven
cooking at high temperatures without a load.
Replace the facade gasket every six (6) months.
To replace it, proceed as follows:
1. Remove the gasket from its seat;
2. Clean the latter of any traces of dirt;
3. Insert the new gasket along the entire seat.
1
2
G.9

Inner, outer and cooking chamber glass

Keeping the glass mounted on the oven door clean is important
for their dual role: shielding the user from the temperatures that
develop in the cooking cavity and allowing visibility inside to
ensure control of the cooking at all times.
After each washing cycle of the cooking chamber:
1. Clean the edge of the internal glass. See figure below;
2. With the door open, press the two top and bottom retaining
clips as shown in the figure to reach the interspace between
the inner and external glass;
Clean the outer side of the internal glass door using a glass
product;
3. Clean then the interspace surfaces between the doors.
CLICK !
65