Compliant Cables And Accessories - GE Dash 3000 Service Manual

Compliant cables and accessories

2000966-542D
Electromagnetic compatibility (EMC): Electromagnetic compatibility (EMC)
CAUTION
The use of accessories, transducers and cables other than
those specified may result in increased emissions or
decreased immunity performance of the equipment or
system.
The table below lists cables, transducers, and other applicable
accessories with which GE EMC compliance.
NOTE:
Any supplied accessories that do not affect EMC compliance are not
included.
Category
ECG cables
Multi-Link 12-Ld ECG Standard Cable
Multi-Link 5-Ld ECG Standard Cable
Multi-Link 3-Ld ECG Neonatal Cable
Multi-Link 3-Ld ECG Cable w/Grabber
Multi-Link 5-Ld ECG ESU
Multi-Link, 3/5-Ld ECG Cable
Multi-Link 3-Ld Neonatal ECG Cable
Multi-Link 3-Ld ECG Cable w/Grabber
Multi-Link 6-Ld ECG Cable
Multi-Link 12 SL ECG Cable
Multi-Link 3/5/6 Adapter
Multi-Link to 300-Series 3-Ld Trunk Cable
Multi-Link to 300-Series 5-Ld Trunk Cable
ECG Multi-Link lead wires
Multi-Link lead wire Set-Group, 5-Ld, Grabber
Multi-Link lead wire Set-Group, 3-Ld, Grabber
Multi-Link lead wire set, 5-Ld, Grabber
Multi-Link lead wire set, 5-Ld, Grabber V2-V6
Multi-Link lead wire set, 3-Ld, MiniGrab AHA Ld I
Multi-Link lead wire set, 3-Ld, MiniGrab IEC Ld I
Dash 3000/4000/5000
Description Maximum length
3.6 m / 12 ft
6 m / 20 ft
3.6 m / 12 ft
3.6 m / 12 ft
3.6 m / 12 ft
3.6 m / 12 ft
3.6 m / 12 ft
3.6 m / 12 ft
3.6 m / 12 ft
3.6 m / 12 ft
N/A
3 m / 10 ft
3 m / 10 ft
130 cm / 51 in
130 cm / 51 in
130 cm / 51 in
130 cm / 51 in
74 cm / 29 in
74 cm / 29 in
A-7