About The Cadex Smart Two+ Charger - GE Dash 3000 Service Manual

About the Cadex SMart Two+ charger

Battery charger LED indicators
Equipment software requirements
5-16
Preventive maintenance: Battery maintenance
NOTE
The Cadex SMart Two+ charger is no longer available for purchase.
However, if your site has a Cadex SMart Two+ charger, you should
continue to use it to charge and condition the battery.
The following is a quick guide which identifies the meaning of the
charger LEDs.
LED indicators
RUN
RUN and CONDITION
READY
READY and CONDITION
FAIL
FAIL and CONDITION
The patient monitor must use Dash 3000/4000 software version 2A or

later.
The Cadex SMart Two+ charger must use software version 1.31 or

later.
Dash 3000/4000/5000
Illuminated
Charging in progress.
Conditioning in progress.
Charging is complete.
Conditioning is complete —
pass target.
Battery fault.
Conditioning is complete — fail
target.
Flashing
Initializing the battery.
Conditioning is required.
Charger fault.
2000966-542D