GE LOGIQ E9 Service Manual page 196

GE
D 5573152-100, R
IRECTION
6-5-3 Adjusting the Z Mechanism
Table 6-12
1.
There are no adjustments for the OP
vertical movement.
The Z mechanism can be manually
repositioned in the event the drive gear is
disconnected or has failed.
Push and hold the lever toward the center
of the device, and the OP can be adjusted
vertically.
Operator console can drop unexpectedly when the mechanism is released.
6-5-4 XY Manual Release for Lock and Brake Mechanism and Adjustment
6-5-4-1 XY Manual Release for Lock and Brake Mechanism
Table 6-13
1. This procedure is intended to release and
adjust the XY mechanism.
Use a small tipped screwdriver and press in
until a "click" or the release, releases.
Some force may be required if the lock
adjustment is too tight.
6 - 20
. 2
EV
Adjusting the Z Mechanism
Steps
WARNING WARNING
XY Manual Release for Lock and Brake Mechanism
Steps
Section 6-5 - Operator Panel movement
LOGIQ E9 S
Corresponding Graphic
Z Mechanism Manual adjustment lever
Corresponding Graphic
XY Manual Release for Lock and
Brake Mechanism
M
ERVICE ANUAL