2
1
1. Headlight unit
2. Headlight coupler
11. Connect the auxiliary light cou-
pler.
12. Align the holes in the headlight
unit with the holes in the headlight
unit cover.
13. Install the grommets.
14. Place the headlight unit side cov-
ers in their original position, and
then install the bolts.
15. Have a Yamaha dealer adjust the
headlight beam if necessary.
PERIODIC MAINTENANCE AND ADJUSTMENT
Tail/brake light
This model is equipped with an LED-
type tail/brake light.
If the tail/brake light does not come on,
have a Yamaha dealer check it.
6-36
EAU24182
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
2
1. Turn signal light lens
2. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
EAU24205
1
6