Clutch Lever; Shift Pedal - Yamaha MT09 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
The throttle grip must be completely
closed in order to change the drive mo-
de. (See page 3-13 for an explanation
of each drive mode.)
TIP
3
 The mode is set to "STD" by de-
fault. The mode resets to "STD"
when the key is turned to "OFF".
 The selected mode is shown on
the drive mode display. (See page
3-8.)

Clutch lever

1
1. Clutch lever
The clutch lever is located at the left
handlebar grip. To disengage the
clutch, pull the lever toward the han-
dlebar grip. To engage the clutch, re-
lease the lever. The lever should be
pulled rapidly and released slowly for
smooth clutch operation.
The clutch lever is equipped with a
clutch switch, which is part of the igni-
tion circuit cut-off system. (See page
3-26.)
3-15
EAU12821

Shift pedal

1
1. Shift pedal
The shift pedal is located on the left
side of the motorcycle and is used in
combination with the clutch lever when
shifting the gears of the 6-speed con-
stant-mesh transmission equipped on
this motorcycle.
EAU12872