Yamaha MT-10 2020 Owner's Manual page 35

fueling and traveling 5 km (3 mi).
Instantaneous fuel consumption
mode
1
1. Instantaneous fuel consumption display
The instantaneous fuel consumption
display can be set to either "km/L",
"L/100 km" or "MPG".

"km/L": The distance that can be
traveled on 1.0 L of fuel under the
current riding conditions is shown.

"L/100 km": The amount of fuel
necessary to travel 100 km under
the current riding conditions is
shown.

"MPG": The distance that can be
traveled on 1.0 US.gal of fuel un-
der the current riding conditions is
Instrument and control functions
shown.
To switch between the instantaneous
fuel consumption display settings, push
the "CLOCK" and "RESET" button to-
gether.
TIP
If traveling at speeds under 20 km/h (12
mi/h), "– –.–" is displayed.
Average fuel consumption mode
1
1. Average fuel consumption display
This display shows the average fuel
consumption since it was last reset.
The average fuel consumption display
can be set to either "AVE – –.– km/L",
"AVE – –.– L/100 km" or "AVE – –.–
MPG".
5-12

"AVE – –.– km/L": The average
distance that can be traveled on
1.0 L of fuel is shown.

"AVE – –.– L/100 km": The aver-
age amount of fuel necessary to
travel 100 km is shown.

"AVE – –.– MPG": The average
distance that can be traveled on
1.0 US.gal of fuel is shown.
To switch between the average fuel
consumption display settings, push the
"CLOCK" and "RESET" button togeth-
er.
To reset the average fuel consumption,
push the "RESET" button for two sec-
onds.
TIP
After resetting the average fuel con-
sumption, "– –.–" will be shown until the
vehicle has traveled 1 km (0.6 mi).
1
2
3
4
5
6
7
8
9
10
11
12